def ttypager(text):
"""Page through text on a text terminal."""
lines = plain(text).split('\n')
try:
import tty
fd = sys.stdin.fileno()
old = tty.tcgetattr(fd)
tty.setcbreak(fd)
getchar = lambda: sys.stdin.read(1)
except (ImportError, AttributeError):
tty = None
getchar = lambda: sys.stdin.readline()[:-1][:1]
try:
r = inc = os.environ.get('LINES', 25) - 1
sys.stdout.write('\n'.join(lines[:inc]) + '\n')
while lines[r:]:
sys.stdout.write('-- more --')
sys.stdout.flush()
c = getchar()
if c in ('q', 'Q'):
sys.stdout.write('\r \r')
break
elif c in ('\r', '\n'):
sys.stdout.write('\r \r' + lines[r] + '\n')
r = r + 1
continue
if c in ('b', 'B', '\x1b'):
r = r - inc - inc
if r < 0: r = 0
sys.stdout.write('\n' + '\n'.join(lines[r:r+inc]) + '\n')
r = r + inc
finally:
if tty:
tty.tcsetattr(fd, tty.TCSAFLUSH, old)
python类tcgetattr()的实例源码
def getecho(self):
"""This returns the terminal echo mode. This returns True if echo is
on or False if echo is off. Child applications that are expecting you
to enter a password often set ECHO False. See waitnoecho(). """
attr = termios.tcgetattr(self.child_fd)
if attr[3] & termios.ECHO:
return True
return False
def setecho(self, state):
"""This sets the terminal echo mode on or off. Note that anything the
child sent before the echo will be lost, so you should be sure that
your input buffer is empty before you call setecho(). For example, the
following will work as expected::
p = pexpect.spawn('cat')
p.sendline ('1234') # We will see this twice (once from tty echo and again from cat).
p.expect (['1234'])
p.expect (['1234'])
p.setecho(False) # Turn off tty echo
p.sendline ('abcd') # We will set this only once (echoed by cat).
p.sendline ('wxyz') # We will set this only once (echoed by cat)
p.expect (['abcd'])
p.expect (['wxyz'])
The following WILL NOT WORK because the lines sent before the setecho
will be lost::
p = pexpect.spawn('cat')
p.sendline ('1234') # We will see this twice (once from tty echo and again from cat).
p.setecho(False) # Turn off tty echo
p.sendline ('abcd') # We will set this only once (echoed by cat).
p.sendline ('wxyz') # We will set this only once (echoed by cat)
p.expect (['1234'])
p.expect (['1234'])
p.expect (['abcd'])
p.expect (['wxyz'])
"""
self.child_fd
attr = termios.tcgetattr(self.child_fd)
if state:
attr[3] = attr[3] | termios.ECHO
else:
attr[3] = attr[3] & ~termios.ECHO
# I tried TCSADRAIN and TCSAFLUSH, but these were inconsistent
# and blocked on some platforms. TCSADRAIN is probably ideal if it
# worked.
termios.tcsetattr(self.child_fd, termios.TCSANOW, attr)
def sendeof(self):
"""This sends an EOF to the child. This sends a character which causes
the pending parent output buffer to be sent to the waiting child
program without waiting for end-of-line. If it is the first character
of the line, the read() in the user program returns 0, which signifies
end-of-file. This means to work as expected a sendeof() has to be
called at the beginning of a line. This method does not send a newline.
It is the responsibility of the caller to ensure the eof is sent at the
beginning of a line. """
# Hmmm... how do I send an EOF?
# C if ((m = write(pty, *buf, p - *buf)) < 0)
# C return (errno == EWOULDBLOCK) ? n : -1;
#fd = sys.stdin.fileno()
# old = termios.tcgetattr(fd) # remember current state
#attr = termios.tcgetattr(fd)
# attr[3] = attr[3] | termios.ICANON # ICANON must be set to recognize EOF
# try: # use try/finally to ensure state gets restored
# termios.tcsetattr(fd, termios.TCSADRAIN, attr)
# if hasattr(termios, 'CEOF'):
# os.write (self.child_fd, '%c' % termios.CEOF)
# else:
# # Silly platform does not define CEOF so assume CTRL-D
# os.write (self.child_fd, '%c' % 4)
# finally: # restore state
# termios.tcsetattr(fd, termios.TCSADRAIN, old)
if hasattr(termios, 'VEOF'):
char = termios.tcgetattr(self.child_fd)[6][termios.VEOF]
else:
# platform does not define VEOF so assume CTRL-D
char = chr(4)
self.send(char)
def sendintr(self):
"""This sends a SIGINT to the child. It does not require
the SIGINT to be the first character on a line. """
if hasattr(termios, 'VINTR'):
char = termios.tcgetattr(self.child_fd)[6][termios.VINTR]
else:
# platform does not define VINTR so assume CTRL-C
char = chr(3)
self.send(char)
def run():
global options, old
args = sys.argv[1:]
if '-l' in args: # cvs is an idiot
i = args.index('-l')
args = args[i:i+2]+args
del args[i+2:i+4]
for arg in args[:]:
try:
i = args.index(arg)
if arg[:2] == '-o' and args[i+1][0]!='-':
args[i:i+2] = [] # suck on it scp
except ValueError:
pass
options = ClientOptions()
try:
options.parseOptions(args)
except usage.UsageError, u:
print 'ERROR: %s' % u
options.opt_help()
sys.exit(1)
if options['log']:
if options['logfile']:
if options['logfile'] == '-':
f = sys.stdout
else:
f = file(options['logfile'], 'a+')
else:
f = sys.stderr
realout = sys.stdout
log.startLogging(f)
sys.stdout = realout
else:
log.discardLogs()
doConnect()
fd = sys.stdin.fileno()
try:
old = tty.tcgetattr(fd)
except:
old = None
try:
oldUSR1 = signal.signal(signal.SIGUSR1, lambda *a: reactor.callLater(0, reConnect))
except:
oldUSR1 = None
try:
reactor.run()
finally:
if old:
tty.tcsetattr(fd, tty.TCSANOW, old)
if oldUSR1:
signal.signal(signal.SIGUSR1, oldUSR1)
if (options['command'] and options['tty']) or not options['notty']:
signal.signal(signal.SIGWINCH, signal.SIG_DFL)
if sys.stdout.isatty() and not options['command']:
print 'Connection to %s closed.' % options['host']
sys.exit(exitStatus)
def interact(self, escape_character=chr(29),
input_filter=None, output_filter=None):
'''This gives control of the child process to the interactive user (the
human at the keyboard). Keystrokes are sent to the child process, and
the stdout and stderr output of the child process is printed. This
simply echos the child stdout and child stderr to the real stdout and
it echos the real stdin to the child stdin. When the user types the
escape_character this method will return None. The escape_character
will not be transmitted. The default for escape_character is
entered as ``Ctrl - ]``, the very same as BSD telnet. To prevent
escaping, escape_character may be set to None.
If a logfile is specified, then the data sent and received from the
child process in interact mode is duplicated to the given log.
You may pass in optional input and output filter functions. These
functions should take a string and return a string. The output_filter
will be passed all the output from the child process. The input_filter
will be passed all the keyboard input from the user. The input_filter
is run BEFORE the check for the escape_character.
Note that if you change the window size of the parent the SIGWINCH
signal will not be passed through to the child. If you want the child
window size to change when the parent's window size changes then do
something like the following example::
import pexpect, struct, fcntl, termios, signal, sys
def sigwinch_passthrough (sig, data):
s = struct.pack("HHHH", 0, 0, 0, 0)
a = struct.unpack('hhhh', fcntl.ioctl(sys.stdout.fileno(),
termios.TIOCGWINSZ , s))
global p
p.setwinsize(a[0],a[1])
# Note this 'p' global and used in sigwinch_passthrough.
p = pexpect.spawn('/bin/bash')
signal.signal(signal.SIGWINCH, sigwinch_passthrough)
p.interact()
'''
# Flush the buffer.
self.write_to_stdout(self.buffer)
self.stdout.flush()
self.buffer = self.string_type()
mode = tty.tcgetattr(self.STDIN_FILENO)
tty.setraw(self.STDIN_FILENO)
if escape_character is not None and PY3:
escape_character = escape_character.encode('latin-1')
try:
self.__interact_copy(escape_character, input_filter, output_filter)
finally:
tty.tcsetattr(self.STDIN_FILENO, tty.TCSAFLUSH, mode)
def interact(self, escape_character=chr(29),
input_filter=None, output_filter=None):
'''This gives control of the child process to the interactive user (the
human at the keyboard). Keystrokes are sent to the child process, and
the stdout and stderr output of the child process is printed. This
simply echos the child stdout and child stderr to the real stdout and
it echos the real stdin to the child stdin. When the user types the
escape_character this method will return None. The escape_character
will not be transmitted. The default for escape_character is
entered as ``Ctrl - ]``, the very same as BSD telnet. To prevent
escaping, escape_character may be set to None.
If a logfile is specified, then the data sent and received from the
child process in interact mode is duplicated to the given log.
You may pass in optional input and output filter functions. These
functions should take a string and return a string. The output_filter
will be passed all the output from the child process. The input_filter
will be passed all the keyboard input from the user. The input_filter
is run BEFORE the check for the escape_character.
Note that if you change the window size of the parent the SIGWINCH
signal will not be passed through to the child. If you want the child
window size to change when the parent's window size changes then do
something like the following example::
import pexpect, struct, fcntl, termios, signal, sys
def sigwinch_passthrough (sig, data):
s = struct.pack("HHHH", 0, 0, 0, 0)
a = struct.unpack('hhhh', fcntl.ioctl(sys.stdout.fileno(),
termios.TIOCGWINSZ , s))
global p
p.setwinsize(a[0],a[1])
# Note this 'p' global and used in sigwinch_passthrough.
p = pexpect.spawn('/bin/bash')
signal.signal(signal.SIGWINCH, sigwinch_passthrough)
p.interact()
'''
# Flush the buffer.
self.write_to_stdout(self.buffer)
self.stdout.flush()
self.buffer = self.string_type()
mode = tty.tcgetattr(self.STDIN_FILENO)
tty.setraw(self.STDIN_FILENO)
if escape_character is not None and PY3:
escape_character = escape_character.encode('latin-1')
try:
self.__interact_copy(escape_character, input_filter, output_filter)
finally:
tty.tcsetattr(self.STDIN_FILENO, tty.TCSAFLUSH, mode)
def ttypager(text):
"""Page through text on a text terminal."""
lines = plain(_encode(plain(text), getattr(sys.stdout, 'encoding', _encoding))).split('\n')
try:
import tty
fd = sys.stdin.fileno()
old = tty.tcgetattr(fd)
tty.setcbreak(fd)
getchar = lambda: sys.stdin.read(1)
except (ImportError, AttributeError):
tty = None
getchar = lambda: sys.stdin.readline()[:-1][:1]
try:
try:
h = int(os.environ.get('LINES', 0))
except ValueError:
h = 0
if h <= 1:
h = 25
r = inc = h - 1
sys.stdout.write(join(lines[:inc], '\n') + '\n')
while lines[r:]:
sys.stdout.write('-- more --')
sys.stdout.flush()
c = getchar()
if c in ('q', 'Q'):
sys.stdout.write('\r \r')
break
elif c in ('\r', '\n'):
sys.stdout.write('\r \r' + lines[r] + '\n')
r = r + 1
continue
if c in ('b', 'B', '\x1b'):
r = r - inc - inc
if r < 0: r = 0
sys.stdout.write('\n' + join(lines[r:r+inc], '\n') + '\n')
r = r + inc
finally:
if tty:
tty.tcsetattr(fd, tty.TCSAFLUSH, old)
def ttypager(text):
"""Page through text on a text terminal."""
lines = plain(_encode(plain(text), getattr(sys.stdout, 'encoding', _encoding))).split('\n')
try:
import tty
fd = sys.stdin.fileno()
old = tty.tcgetattr(fd)
tty.setcbreak(fd)
getchar = lambda: sys.stdin.read(1)
except (ImportError, AttributeError):
tty = None
getchar = lambda: sys.stdin.readline()[:-1][:1]
try:
try:
h = int(os.environ.get('LINES', 0))
except ValueError:
h = 0
if h <= 1:
h = 25
r = inc = h - 1
sys.stdout.write(join(lines[:inc], '\n') + '\n')
while lines[r:]:
sys.stdout.write('-- more --')
sys.stdout.flush()
c = getchar()
if c in ('q', 'Q'):
sys.stdout.write('\r \r')
break
elif c in ('\r', '\n'):
sys.stdout.write('\r \r' + lines[r] + '\n')
r = r + 1
continue
if c in ('b', 'B', '\x1b'):
r = r - inc - inc
if r < 0: r = 0
sys.stdout.write('\n' + join(lines[r:r+inc], '\n') + '\n')
r = r + inc
finally:
if tty:
tty.tcsetattr(fd, tty.TCSAFLUSH, old)
def run():
global options, old
args = sys.argv[1:]
if '-l' in args: # cvs is an idiot
i = args.index('-l')
args = args[i:i+2]+args
del args[i+2:i+4]
for arg in args[:]:
try:
i = args.index(arg)
if arg[:2] == '-o' and args[i+1][0]!='-':
args[i:i+2] = [] # suck on it scp
except ValueError:
pass
options = ClientOptions()
try:
options.parseOptions(args)
except usage.UsageError, u:
print 'ERROR: %s' % u
options.opt_help()
sys.exit(1)
if options['log']:
if options['logfile']:
if options['logfile'] == '-':
f = sys.stdout
else:
f = file(options['logfile'], 'a+')
else:
f = sys.stderr
realout = sys.stdout
log.startLogging(f)
sys.stdout = realout
else:
log.discardLogs()
doConnect()
fd = sys.stdin.fileno()
try:
old = tty.tcgetattr(fd)
except:
old = None
try:
oldUSR1 = signal.signal(signal.SIGUSR1, lambda *a: reactor.callLater(0, reConnect))
except:
oldUSR1 = None
try:
reactor.run()
finally:
if old:
tty.tcsetattr(fd, tty.TCSANOW, old)
if oldUSR1:
signal.signal(signal.SIGUSR1, oldUSR1)
if (options['command'] and options['tty']) or not options['notty']:
signal.signal(signal.SIGWINCH, signal.SIG_DFL)
if sys.stdout.isatty() and not options['command']:
print 'Connection to %s closed.' % options['host']
sys.exit(exitStatus)
def setecho(self, state):
'''This sets the terminal echo mode on or off. Note that anything the
child sent before the echo will be lost, so you should be sure that
your input buffer is empty before you call setecho(). For example, the
following will work as expected::
p = pexpect.spawn('cat') # Echo is on by default.
p.sendline('1234') # We expect see this twice from the child...
p.expect(['1234']) # ... once from the tty echo...
p.expect(['1234']) # ... and again from cat itself.
p.setecho(False) # Turn off tty echo
p.sendline('abcd') # We will set this only once (echoed by cat).
p.sendline('wxyz') # We will set this only once (echoed by cat)
p.expect(['abcd'])
p.expect(['wxyz'])
The following WILL NOT WORK because the lines sent before the setecho
will be lost::
p = pexpect.spawn('cat')
p.sendline('1234')
p.setecho(False) # Turn off tty echo
p.sendline('abcd') # We will set this only once (echoed by cat).
p.sendline('wxyz') # We will set this only once (echoed by cat)
p.expect(['1234'])
p.expect(['1234'])
p.expect(['abcd'])
p.expect(['wxyz'])
Not supported on platforms where ``isatty()`` returns False.
'''
errmsg = 'setecho() may not be called on this platform'
try:
attr = termios.tcgetattr(self.child_fd)
except termios.error as err:
if err.args[0] == errno.EINVAL:
raise IOError(err.args[0], '%s: %s.' % (err.args[1], errmsg))
raise
if state:
attr[3] = attr[3] | termios.ECHO
else:
attr[3] = attr[3] & ~termios.ECHO
try:
# I tried TCSADRAIN and TCSAFLUSH, but these were inconsistent and
# blocked on some platforms. TCSADRAIN would probably be ideal.
termios.tcsetattr(self.child_fd, termios.TCSANOW, attr)
except IOError as err:
if err.args[0] == errno.EINVAL:
raise IOError(err.args[0], '%s: %s.' % (err.args[1], errmsg))
raise
self.echo = state
def interact(self, escape_character=chr(29),
input_filter=None, output_filter=None):
'''This gives control of the child process to the interactive user (the
human at the keyboard). Keystrokes are sent to the child process, and
the stdout and stderr output of the child process is printed. This
simply echos the child stdout and child stderr to the real stdout and
it echos the real stdin to the child stdin. When the user types the
escape_character this method will stop. The default for
escape_character is ^]. This should not be confused with ASCII 27 --
the ESC character. ASCII 29 was chosen for historical merit because
this is the character used by 'telnet' as the escape character. The
escape_character will not be sent to the child process.
You may pass in optional input and output filter functions. These
functions should take a string and return a string. The output_filter
will be passed all the output from the child process. The input_filter
will be passed all the keyboard input from the user. The input_filter
is run BEFORE the check for the escape_character.
Note that if you change the window size of the parent the SIGWINCH
signal will not be passed through to the child. If you want the child
window size to change when the parent's window size changes then do
something like the following example::
import pexpect, struct, fcntl, termios, signal, sys
def sigwinch_passthrough (sig, data):
s = struct.pack("HHHH", 0, 0, 0, 0)
a = struct.unpack('hhhh', fcntl.ioctl(sys.stdout.fileno(),
termios.TIOCGWINSZ , s))
global p
p.setwinsize(a[0],a[1])
# Note this 'p' global and used in sigwinch_passthrough.
p = pexpect.spawn('/bin/bash')
signal.signal(signal.SIGWINCH, sigwinch_passthrough)
p.interact()
'''
# Flush the buffer.
self.write_to_stdout(self.buffer)
self.stdout.flush()
self.buffer = self.string_type()
mode = tty.tcgetattr(self.STDIN_FILENO)
tty.setraw(self.STDIN_FILENO)
if PY3:
escape_character = escape_character.encode('latin-1')
try:
self.__interact_copy(escape_character, input_filter, output_filter)
finally:
tty.tcsetattr(self.STDIN_FILENO, tty.TCSAFLUSH, mode)
def interact(self, escape_character=chr(29),
input_filter=None, output_filter=None):
'''This gives control of the child process to the interactive user (the
human at the keyboard). Keystrokes are sent to the child process, and
the stdout and stderr output of the child process is printed. This
simply echos the child stdout and child stderr to the real stdout and
it echos the real stdin to the child stdin. When the user types the
escape_character this method will return None. The escape_character
will not be transmitted. The default for escape_character is
entered as ``Ctrl - ]``, the very same as BSD telnet. To prevent
escaping, escape_character may be set to None.
If a logfile is specified, then the data sent and received from the
child process in interact mode is duplicated to the given log.
You may pass in optional input and output filter functions. These
functions should take a string and return a string. The output_filter
will be passed all the output from the child process. The input_filter
will be passed all the keyboard input from the user. The input_filter
is run BEFORE the check for the escape_character.
Note that if you change the window size of the parent the SIGWINCH
signal will not be passed through to the child. If you want the child
window size to change when the parent's window size changes then do
something like the following example::
import pexpect, struct, fcntl, termios, signal, sys
def sigwinch_passthrough (sig, data):
s = struct.pack("HHHH", 0, 0, 0, 0)
a = struct.unpack('hhhh', fcntl.ioctl(sys.stdout.fileno(),
termios.TIOCGWINSZ , s))
global p
p.setwinsize(a[0],a[1])
# Note this 'p' global and used in sigwinch_passthrough.
p = pexpect.spawn('/bin/bash')
signal.signal(signal.SIGWINCH, sigwinch_passthrough)
p.interact()
'''
# Flush the buffer.
self.write_to_stdout(self.buffer)
self.stdout.flush()
self.buffer = self.string_type()
mode = tty.tcgetattr(self.STDIN_FILENO)
tty.setraw(self.STDIN_FILENO)
if escape_character is not None and PY3:
escape_character = escape_character.encode('latin-1')
try:
self.__interact_copy(escape_character, input_filter, output_filter)
finally:
tty.tcsetattr(self.STDIN_FILENO, tty.TCSAFLUSH, mode)
def ttypager(text):
"""Page through text on a text terminal."""
lines = plain(_escape_stdout(text)).split('\n')
try:
import tty
fd = sys.stdin.fileno()
old = tty.tcgetattr(fd)
tty.setcbreak(fd)
getchar = lambda: sys.stdin.read(1)
except (ImportError, AttributeError, io.UnsupportedOperation):
tty = None
getchar = lambda: sys.stdin.readline()[:-1][:1]
try:
try:
h = int(os.environ.get('LINES', 0))
except ValueError:
h = 0
if h <= 1:
h = 25
r = inc = h - 1
sys.stdout.write('\n'.join(lines[:inc]) + '\n')
while lines[r:]:
sys.stdout.write('-- more --')
sys.stdout.flush()
c = getchar()
if c in ('q', 'Q'):
sys.stdout.write('\r \r')
break
elif c in ('\r', '\n'):
sys.stdout.write('\r \r' + lines[r] + '\n')
r = r + 1
continue
if c in ('b', 'B', '\x1b'):
r = r - inc - inc
if r < 0: r = 0
sys.stdout.write('\n' + '\n'.join(lines[r:r+inc]) + '\n')
r = r + inc
finally:
if tty:
tty.tcsetattr(fd, tty.TCSAFLUSH, old)
def open(self, command, env={}):
""" Create subprocess using forkpty() """
# parse command
command_arr = shlex.split(command)
executable = command_arr[0]
args = command_arr
# try to fork a new pty
try:
self.pid, self.fd = pty.fork()
except:
return False
# child proc, replace with command after altering terminal attributes
if self.pid == 0:
# set requested environment variables
for k in env.keys():
os.environ[k] = env[k]
# set tty attributes
try:
attrs = tty.tcgetattr(1)
attrs[0] = attrs[0] ^ tty.IGNBRK
attrs[0] = attrs[0] | tty.BRKINT | tty.IXANY | tty.IMAXBEL
attrs[2] = attrs[2] | tty.HUPCL
attrs[3] = attrs[3] | tty.ICANON | tty.ECHO | tty.ISIG | tty.ECHOKE
attrs[6][tty.VMIN] = 1
attrs[6][tty.VTIME] = 0
tty.tcsetattr(1, tty.TCSANOW, attrs)
except:
pass
# replace this process with the subprocess
os.execvp(executable, args)
# else master, do nothing
else:
pass
def setecho(self, state):
'''This sets the terminal echo mode on or off. Note that anything the
child sent before the echo will be lost, so you should be sure that
your input buffer is empty before you call setecho(). For example, the
following will work as expected::
p = pexpect.spawn('cat') # Echo is on by default.
p.sendline('1234') # We expect see this twice from the child...
p.expect(['1234']) # ... once from the tty echo...
p.expect(['1234']) # ... and again from cat itself.
p.setecho(False) # Turn off tty echo
p.sendline('abcd') # We will set this only once (echoed by cat).
p.sendline('wxyz') # We will set this only once (echoed by cat)
p.expect(['abcd'])
p.expect(['wxyz'])
The following WILL NOT WORK because the lines sent before the setecho
will be lost::
p = pexpect.spawn('cat')
p.sendline('1234')
p.setecho(False) # Turn off tty echo
p.sendline('abcd') # We will set this only once (echoed by cat).
p.sendline('wxyz') # We will set this only once (echoed by cat)
p.expect(['1234'])
p.expect(['1234'])
p.expect(['abcd'])
p.expect(['wxyz'])
Not supported on platforms where ``isatty()`` returns False.
'''
errmsg = 'setecho() may not be called on this platform'
try:
attr = termios.tcgetattr(self.child_fd)
except termios.error as err:
if err.args[0] == errno.EINVAL:
raise IOError(err.args[0], '%s: %s.' % (err.args[1], errmsg))
raise
if state:
attr[3] = attr[3] | termios.ECHO
else:
attr[3] = attr[3] & ~termios.ECHO
try:
# I tried TCSADRAIN and TCSAFLUSH, but these were inconsistent and
# blocked on some platforms. TCSADRAIN would probably be ideal.
termios.tcsetattr(self.child_fd, termios.TCSANOW, attr)
except IOError as err:
if err.args[0] == errno.EINVAL:
raise IOError(err.args[0], '%s: %s.' % (err.args[1], errmsg))
raise
self.echo = state
def interact(self, escape_character=chr(29),
input_filter=None, output_filter=None):
'''This gives control of the child process to the interactive user (the
human at the keyboard). Keystrokes are sent to the child process, and
the stdout and stderr output of the child process is printed. This
simply echos the child stdout and child stderr to the real stdout and
it echos the real stdin to the child stdin. When the user types the
escape_character this method will stop. The default for
escape_character is ^]. This should not be confused with ASCII 27 --
the ESC character. ASCII 29 was chosen for historical merit because
this is the character used by 'telnet' as the escape character. The
escape_character will not be sent to the child process.
You may pass in optional input and output filter functions. These
functions should take a string and return a string. The output_filter
will be passed all the output from the child process. The input_filter
will be passed all the keyboard input from the user. The input_filter
is run BEFORE the check for the escape_character.
Note that if you change the window size of the parent the SIGWINCH
signal will not be passed through to the child. If you want the child
window size to change when the parent's window size changes then do
something like the following example::
import pexpect, struct, fcntl, termios, signal, sys
def sigwinch_passthrough (sig, data):
s = struct.pack("HHHH", 0, 0, 0, 0)
a = struct.unpack('hhhh', fcntl.ioctl(sys.stdout.fileno(),
termios.TIOCGWINSZ , s))
global p
p.setwinsize(a[0],a[1])
# Note this 'p' global and used in sigwinch_passthrough.
p = pexpect.spawn('/bin/bash')
signal.signal(signal.SIGWINCH, sigwinch_passthrough)
p.interact()
'''
# Flush the buffer.
self.write_to_stdout(self.buffer)
self.stdout.flush()
self.buffer = self.string_type()
mode = tty.tcgetattr(self.STDIN_FILENO)
tty.setraw(self.STDIN_FILENO)
if PY3:
escape_character = escape_character.encode('latin-1')
try:
self.__interact_copy(escape_character, input_filter, output_filter)
finally:
tty.tcsetattr(self.STDIN_FILENO, tty.TCSAFLUSH, mode)
def ttypager(text):
"""Page through text on a text terminal."""
lines = plain(_encode(plain(text), getattr(sys.stdout, 'encoding', _encoding))).split('\n')
try:
import tty
fd = sys.stdin.fileno()
old = tty.tcgetattr(fd)
tty.setcbreak(fd)
getchar = lambda: sys.stdin.read(1)
except (ImportError, AttributeError):
tty = None
getchar = lambda: sys.stdin.readline()[:-1][:1]
try:
try:
h = int(os.environ.get('LINES', 0))
except ValueError:
h = 0
if h <= 1:
h = 25
r = inc = h - 1
sys.stdout.write(join(lines[:inc], '\n') + '\n')
while lines[r:]:
sys.stdout.write('-- more --')
sys.stdout.flush()
c = getchar()
if c in ('q', 'Q'):
sys.stdout.write('\r \r')
break
elif c in ('\r', '\n'):
sys.stdout.write('\r \r' + lines[r] + '\n')
r = r + 1
continue
if c in ('b', 'B', '\x1b'):
r = r - inc - inc
if r < 0: r = 0
sys.stdout.write('\n' + join(lines[r:r+inc], '\n') + '\n')
r = r + inc
finally:
if tty:
tty.tcsetattr(fd, tty.TCSAFLUSH, old)
def run():
global options, old
args = sys.argv[1:]
if '-l' in args: # cvs is an idiot
i = args.index('-l')
args = args[i:i+2]+args
del args[i+2:i+4]
for arg in args[:]:
try:
i = args.index(arg)
if arg[:2] == '-o' and args[i+1][0]!='-':
args[i:i+2] = [] # suck on it scp
except ValueError:
pass
options = ClientOptions()
try:
options.parseOptions(args)
except usage.UsageError as u:
print('ERROR: %s' % u)
options.opt_help()
sys.exit(1)
if options['log']:
if options['logfile']:
if options['logfile'] == '-':
f = sys.stdout
else:
f = open(options['logfile'], 'a+')
else:
f = sys.stderr
realout = sys.stdout
log.startLogging(f)
sys.stdout = realout
else:
log.discardLogs()
doConnect()
fd = sys.stdin.fileno()
try:
old = tty.tcgetattr(fd)
except:
old = None
try:
oldUSR1 = signal.signal(signal.SIGUSR1, lambda *a: reactor.callLater(0, reConnect))
except:
oldUSR1 = None
try:
reactor.run()
finally:
if old:
tty.tcsetattr(fd, tty.TCSANOW, old)
if oldUSR1:
signal.signal(signal.SIGUSR1, oldUSR1)
if (options['command'] and options['tty']) or not options['notty']:
signal.signal(signal.SIGWINCH, signal.SIG_DFL)
if sys.stdout.isatty() and not options['command']:
print('Connection to %s closed.' % options['host'])
sys.exit(exitStatus)
