def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self.is_open:
raise SerialException("Port is already open.")
self.fd = None
# open
try:
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
except OSError as msg:
self.fd = None
raise SerialException(msg.errno, "could not open port %s: %s" % (self._port, msg))
#~ fcntl.fcntl(self.fd, fcntl.F_SETFL, 0) # set blocking
try:
self._reconfigure_port(force_update=True)
except:
try:
os.close(self.fd)
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.fd = None
raise
else:
self.is_open = True
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
self.reset_input_buffer()
python类O_NOCTTY的实例源码
def pty_make_controlling_tty(tty_fd):
'''This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. '''
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty, if any. Raises OSError of ENXIO
# if there was no controlling tty to begin with, such as when
# executed by a cron(1) job.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
except OSError as err:
if err.errno != errno.ENXIO:
raise
os.setsid()
# Verify we are disconnected from controlling tty by attempting to open
# it again. We expect that OSError of ENXIO should always be raised.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
raise ExceptionPexpect("OSError of errno.ENXIO should be raised.")
except OSError as err:
if err.errno != errno.ENXIO:
raise
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
os.close(fd)
def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self.is_open:
raise SerialException("Port is already open.")
self.fd = None
# open
try:
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
except OSError as msg:
self.fd = None
raise SerialException(msg.errno, "could not open port %s: %s" % (self._port, msg))
#~ fcntl.fcntl(self.fd, fcntl.F_SETFL, 0) # set blocking
try:
self._reconfigure_port(force_update=True)
except:
try:
os.close(self.fd)
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.fd = None
raise
else:
self.is_open = True
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
self.reset_input_buffer()
def __init__(self, device="/dev/ttyAMA0", baudrate=9600):
if not device.startswith("/dev/"):
device = "/dev/%s" % device
if isinstance(baudrate, str):
baudrate = int(baudrate)
aname = "B%d" % baudrate
if not hasattr(termios, aname):
raise Exception("Unsupported baudrate")
self.baudrate = baudrate
Bus.__init__(self, "UART", device, os.O_RDWR | os.O_NOCTTY)
fcntl.fcntl(self.fd, fcntl.F_SETFL, os.O_NDELAY)
#backup = termios.tcgetattr(self.fd)
options = termios.tcgetattr(self.fd)
# iflag
options[0] = 0
# oflag
options[1] = 0
# cflag
options[2] |= (termios.CLOCAL | termios.CREAD)
options[2] &= ~termios.PARENB
options[2] &= ~termios.CSTOPB
options[2] &= ~termios.CSIZE
options[2] |= termios.CS8
# lflag
options[3] = 0
speed = getattr(termios, aname)
# input speed
options[4] = speed
# output speed
options[5] = speed
termios.tcsetattr(self.fd, termios.TCSADRAIN, options)
def pty_make_controlling_tty(tty_fd):
'''This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. '''
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty, if any. Raises OSError of ENXIO
# if there was no controlling tty to begin with, such as when
# executed by a cron(1) job.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
except OSError as err:
if err.errno != errno.ENXIO:
raise
os.setsid()
# Verify we are disconnected from controlling tty by attempting to open
# it again. We expect that OSError of ENXIO should always be raised.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
raise ExceptionPexpect("OSError of errno.ENXIO should be raised.")
except OSError as err:
if err.errno != errno.ENXIO:
raise
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
os.close(fd)
def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self.is_open:
raise SerialException("Port is already open.")
self.fd = None
# open
try:
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
except OSError as msg:
self.fd = None
raise SerialException(msg.errno, "could not open port %s: %s" % (self._port, msg))
#~ fcntl.fcntl(self.fd, fcntl.F_SETFL, 0) # set blocking
try:
self._reconfigure_port(force_update=True)
except:
try:
os.close(self.fd)
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.fd = None
raise
else:
self.is_open = True
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
self.reset_input_buffer()
def __pty_make_controlling_tty(self, tty_fd):
"""This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. """
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty if still connected.
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY);
if fd >= 0:
os.close(fd)
os.setsid()
# Verify we are disconnected from controlling tty
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY);
if fd >= 0:
os.close(fd)
raise ExceptionPexpect, "Error! We are not disconnected from a controlling tty."
except:
# Good! We are disconnected from a controlling tty.
pass
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR);
if fd < 0:
raise ExceptionPexpect, "Error! Could not open child pty, " + child_name
else:
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
if fd < 0:
raise ExceptionPexpect, "Error! Could not open controlling tty, /dev/tty"
else:
os.close(fd)
def __init__(self, device="/dev/ttyAMA0", baudrate=9600):
if not device.startswith("/dev/"):
device = "/dev/%s" % device
if isinstance(baudrate, str):
baudrate = int(baudrate)
aname = "B%d" % baudrate
if not hasattr(termios, aname):
raise Exception("Unsupported baudrate")
self.baudrate = baudrate
Bus.__init__(self, "UART", device, os.O_RDWR | os.O_NOCTTY)
fcntl.fcntl(self.fd, fcntl.F_SETFL, os.O_NDELAY)
#backup = termios.tcgetattr(self.fd)
options = termios.tcgetattr(self.fd)
# iflag
options[0] = 0
# oflag
options[1] = 0
# cflag
options[2] |= (termios.CLOCAL | termios.CREAD)
options[2] &= ~termios.PARENB
options[2] &= ~termios.CSTOPB
options[2] &= ~termios.CSIZE
options[2] |= termios.CS8
# lflag
options[3] = 0
speed = getattr(termios, aname)
# input speed
options[4] = speed
# output speed
options[5] = speed
termios.tcsetattr(self.fd, termios.TCSADRAIN, options)
def __pty_make_controlling_tty(self, tty_fd):
'''This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. '''
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty, if any. Raises OSError of ENXIO
# if there was no controlling tty to begin with, such as when
# executed by a cron(1) job.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
except OSError as err:
if err.errno != errno.ENXIO:
raise
os.setsid()
# Verify we are disconnected from controlling tty by attempting to open
# it again. We expect that OSError of ENXIO should always be raised.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
raise ExceptionPexpect("OSError of errno.ENXIO should be raised.")
except OSError as err:
if err.errno != errno.ENXIO:
raise
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
os.close(fd)
def pty_make_controlling_tty(tty_fd):
'''This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. '''
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty, if any. Raises OSError of ENXIO
# if there was no controlling tty to begin with, such as when
# executed by a cron(1) job.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
except OSError as err:
if err.errno != errno.ENXIO:
raise
os.setsid()
# Verify we are disconnected from controlling tty by attempting to open
# it again. We expect that OSError of ENXIO should always be raised.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
raise ExceptionPexpect("OSError of errno.ENXIO should be raised.")
except OSError as err:
if err.errno != errno.ENXIO:
raise
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
os.close(fd)
def pty_make_controlling_tty(tty_fd):
'''This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. '''
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty, if any. Raises OSError of ENXIO
# if there was no controlling tty to begin with, such as when
# executed by a cron(1) job.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
except OSError as err:
if err.errno != errno.ENXIO:
raise
os.setsid()
# Verify we are disconnected from controlling tty by attempting to open
# it again. We expect that OSError of ENXIO should always be raised.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
raise ExceptionPexpect("OSError of errno.ENXIO should be raised.")
except OSError as err:
if err.errno != errno.ENXIO:
raise
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
os.close(fd)
def test_uses_tty_directly(self):
with mock.patch('os.open') as open, \
mock.patch('io.FileIO') as fileio, \
mock.patch('io.TextIOWrapper') as textio:
# By setting open's return value to None the implementation will
# skip code we don't care about in this test. We can mock this out
# fully if an alternate implementation works differently.
open.return_value = None
getpass.unix_getpass()
open.assert_called_once_with('/dev/tty',
os.O_RDWR | os.O_NOCTTY)
fileio.assert_called_once_with(open.return_value, 'w+')
textio.assert_called_once_with(fileio.return_value)
def __pty_make_controlling_tty(self, tty_fd):
'''This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. '''
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty, if any. Raises OSError of ENXIO
# if there was no controlling tty to begin with, such as when
# executed by a cron(1) job.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
except OSError as err:
if err.errno != errno.ENXIO:
raise
os.setsid()
# Verify we are disconnected from controlling tty by attempting to open
# it again. We expect that OSError of ENXIO should always be raised.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
raise ExceptionPexpect("OSError of errno.ENXIO should be raised.")
except OSError as err:
if err.errno != errno.ENXIO:
raise
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
os.close(fd)
def __init__(self):
"""
Initialize data structures.
"""
self.actions = []
self.closed = []
self.pipeCount = 0
self.O_RDWR = -1
self.O_NOCTTY = -2
self.WNOHANG = -4
self.WEXITSTATUS = lambda x: 0
self.WIFEXITED = lambda x: 1
self.seteuidCalls = []
self.setegidCalls = []
def test_uses_tty_directly(self):
with mock.patch('os.open') as open, \
mock.patch('io.FileIO') as fileio, \
mock.patch('io.TextIOWrapper') as textio:
# By setting open's return value to None the implementation will
# skip code we don't care about in this test. We can mock this out
# fully if an alternate implementation works differently.
open.return_value = None
getpass.unix_getpass()
open.assert_called_once_with('/dev/tty',
os.O_RDWR | os.O_NOCTTY)
fileio.assert_called_once_with(open.return_value, 'w+')
textio.assert_called_once_with(fileio.return_value)
def pty_make_controlling_tty(self,tty_fd):
# borrow this code from pwntools
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty. Harmless if not already connected.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
if fd >= 0:
os.close(fd)
# which exception, shouldnt' we catch explicitly .. ?
except OSError:
# Already disconnected. This happens if running inside cron.
pass
os.setsid()
# Verify we are disconnected from controlling tty
# by attempting to open it again.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
if fd >= 0:
os.close(fd)
raise Exception('Failed to disconnect from ' +
'controlling tty. It is still possible to open /dev/tty.')
# which exception, shouldnt' we catch explicitly .. ?
except OSError:
# Good! We are disconnected from a controlling tty.
pass
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
if fd < 0:
raise Exception("Could not open child pty, " + child_name)
else:
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
if fd < 0:
raise Exception("Could not open controlling tty, /dev/tty")
else:
os.close(fd)
def pty_make_controlling_tty(tty_fd):
'''This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. '''
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty, if any. Raises OSError of ENXIO
# if there was no controlling tty to begin with, such as when
# executed by a cron(1) job.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
except OSError as err:
if err.errno != errno.ENXIO:
raise
os.setsid()
# Verify we are disconnected from controlling tty by attempting to open
# it again. We expect that OSError of ENXIO should always be raised.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
raise ExceptionPexpect("OSError of errno.ENXIO should be raised.")
except OSError as err:
if err.errno != errno.ENXIO:
raise
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
os.close(fd)
def __pty_make_controlling_tty(self, tty_fd):
'''This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. '''
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty, if any. Raises OSError of ENXIO
# if there was no controlling tty to begin with, such as when
# executed by a cron(1) job.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
except OSError as err:
if err.errno != errno.ENXIO:
raise
os.setsid()
# Verify we are disconnected from controlling tty by attempting to open
# it again. We expect that OSError of ENXIO should always be raised.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
os.close(fd)
raise ExceptionPexpect("OSError of errno.ENXIO should be raised.")
except OSError as err:
if err.errno != errno.ENXIO:
raise
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
os.close(fd)
def __pty_make_controlling_tty(self, tty_fd):
"""This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. """
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty if still connected.
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
if fd >= 0:
os.close(fd)
os.setsid()
# Verify we are disconnected from controlling tty
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
if fd >= 0:
os.close(fd)
raise ExceptionPexpect, "Error! We are not disconnected from a controlling tty."
except:
# Good! We are disconnected from a controlling tty.
pass
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
if fd < 0:
raise ExceptionPexpect, "Error! Could not open child pty, " + child_name
else:
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
if fd < 0:
raise ExceptionPexpect, "Error! Could not open controlling tty, /dev/tty"
else:
os.close(fd)
def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self.is_open:
raise SerialException("Port is already open.")
self.fd = None
# open
try:
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
except OSError as msg:
self.fd = None
raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
#~ fcntl.fcntl(self.fd, fcntl.F_SETFL, 0) # set blocking
try:
self._reconfigure_port(force_update=True)
except:
try:
os.close(self.fd)
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.fd = None
raise
else:
self.is_open = True
try:
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
except IOError as e:
if e.errno in (errno.EINVAL, errno.ENOTTY):
# ignore Invalid argument and Inappropriate ioctl
pass
else:
raise
self.reset_input_buffer()
self.pipe_abort_read_r, self.pipe_abort_read_w = os.pipe()
self.pipe_abort_write_r, self.pipe_abort_write_w = os.pipe()
fcntl.fcntl(self.pipe_abort_read_r, fcntl.F_SETFL, os.O_NONBLOCK)
fcntl.fcntl(self.pipe_abort_write_r, fcntl.F_SETFL, os.O_NONBLOCK)
def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self.is_open:
raise SerialException("Port is already open.")
self.fd = None
# open
try:
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
except OSError as msg:
self.fd = None
raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
#~ fcntl.fcntl(self.fd, fcntl.F_SETFL, 0) # set blocking
try:
self._reconfigure_port(force_update=True)
except:
try:
os.close(self.fd)
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.fd = None
raise
else:
self.is_open = True
try:
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
except IOError as e:
if e.errno in (errno.EINVAL, errno.ENOTTY):
# ignore Invalid argument and Inappropriate ioctl
pass
else:
raise
self.reset_input_buffer()
self.pipe_abort_read_r, self.pipe_abort_read_w = os.pipe()
self.pipe_abort_write_r, self.pipe_abort_write_w = os.pipe()
fcntl.fcntl(self.pipe_abort_read_r, fcntl.F_SETFL, os.O_NONBLOCK)
fcntl.fcntl(self.pipe_abort_write_r, fcntl.F_SETFL, os.O_NONBLOCK)
def __pty_make_controlling_tty(self, tty_fd):
'''This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. '''
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty. Harmless if not already connected.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
if fd >= 0:
os.close(fd)
# which exception, shouldnt' we catch explicitly .. ?
except OSError:
# Already disconnected. This happens if running inside cron.
pass
os.setsid()
# Verify we are disconnected from controlling tty
# by attempting to open it again.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
if fd >= 0:
os.close(fd)
raise Exception('Failed to disconnect from ' +
'controlling tty. It is still possible to open /dev/tty.')
# which exception, shouldnt' we catch explicitly .. ?
except OSError:
# Good! We are disconnected from a controlling tty.
pass
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
if fd < 0:
raise Exception("Could not open child pty, " + child_name)
else:
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
if fd < 0:
raise Exception("Could not open controlling tty, /dev/tty")
else:
os.close(fd)
def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self.is_open:
raise SerialException("Port is already open.")
self.fd = None
# open
try:
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
except OSError as msg:
self.fd = None
raise SerialException(msg.errno, "could not open port {0}: {1}".format(self._port, msg))
#~ fcntl.fcntl(self.fd, fcntl.F_SETFL, 0) # set blocking
try:
self._reconfigure_port(force_update=True)
except:
try:
os.close(self.fd)
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.fd = None
raise
else:
self.is_open = True
try:
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
except IOError as e:
if e.errno in (errno.EINVAL, errno.ENOTTY):
# ignore Invalid argument and Inappropriate ioctl
pass
else:
raise
self.reset_input_buffer()
self.pipe_abort_read_r, self.pipe_abort_read_w = os.pipe()
self.pipe_abort_write_r, self.pipe_abort_write_w = os.pipe()
fcntl.fcntl(self.pipe_abort_read_r, fcntl.F_SETFL, os.O_NONBLOCK)
fcntl.fcntl(self.pipe_abort_write_r, fcntl.F_SETFL, os.O_NONBLOCK)
def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self.is_open:
raise SerialException("Port is already open.")
self.fd = None
# open
try:
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
except OSError as msg:
self.fd = None
raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
#~ fcntl.fcntl(self.fd, fcntl.F_SETFL, 0) # set blocking
try:
self._reconfigure_port(force_update=True)
except:
try:
os.close(self.fd)
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.fd = None
raise
else:
self.is_open = True
try:
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
except IOError as e:
if e.errno == 22: # ignore Invalid argument
pass
else:
raise
self.reset_input_buffer()
self.pipe_abort_read_r, self.pipe_abort_read_w = os.pipe()
self.pipe_abort_write_r, self.pipe_abort_write_w = os.pipe()
fcntl.fcntl(self.pipe_abort_read_r, fcntl.F_SETFL, os.O_NONBLOCK)
fcntl.fcntl(self.pipe_abort_write_r, fcntl.F_SETFL, os.O_NONBLOCK)
def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self.is_open:
raise SerialException("Port is already open.")
self.fd = None
# open
try:
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
except OSError as msg:
self.fd = None
raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
#~ fcntl.fcntl(self.fd, fcntl.F_SETFL, 0) # set blocking
try:
self._reconfigure_port(force_update=True)
except:
try:
os.close(self.fd)
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.fd = None
raise
else:
self.is_open = True
try:
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
except IOError as e:
if e.errno in (errno.EINVAL, errno.ENOTTY):
# ignore Invalid argument and Inappropriate ioctl
pass
else:
raise
self.reset_input_buffer()
self.pipe_abort_read_r, self.pipe_abort_read_w = os.pipe()
self.pipe_abort_write_r, self.pipe_abort_write_w = os.pipe()
fcntl.fcntl(self.pipe_abort_read_r, fcntl.F_SETFL, os.O_NONBLOCK)
fcntl.fcntl(self.pipe_abort_write_r, fcntl.F_SETFL, os.O_NONBLOCK)
def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self.is_open:
raise SerialException("Port is already open.")
self.fd = None
# open
try:
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
except OSError as msg:
self.fd = None
raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
#~ fcntl.fcntl(self.fd, fcntl.F_SETFL, 0) # set blocking
try:
self._reconfigure_port(force_update=True)
except:
try:
os.close(self.fd)
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.fd = None
raise
else:
self.is_open = True
try:
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
except IOError as e:
if e.errno in (errno.EINVAL, errno.ENOTTY):
# ignore Invalid argument and Inappropriate ioctl
pass
else:
raise
self.reset_input_buffer()
self.pipe_abort_read_r, self.pipe_abort_read_w = os.pipe()
self.pipe_abort_write_r, self.pipe_abort_write_w = os.pipe()
fcntl.fcntl(self.pipe_abort_read_r, fcntl.F_SETFL, os.O_NONBLOCK)
fcntl.fcntl(self.pipe_abort_write_r, fcntl.F_SETFL, os.O_NONBLOCK)
def __pty_make_controlling_tty(self, tty_fd):
'''This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris. '''
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty. Harmless if not already connected.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
if fd >= 0:
os.close(fd)
# which exception, shouldnt' we catch explicitly .. ?
except OSError:
# Already disconnected. This happens if running inside cron.
pass
os.setsid()
# Verify we are disconnected from controlling tty
# by attempting to open it again.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
if fd >= 0:
os.close(fd)
raise Exception('Failed to disconnect from ' +
'controlling tty. It is still possible to open /dev/tty.')
# which exception, shouldnt' we catch explicitly .. ?
except OSError:
# Good! We are disconnected from a controlling tty.
pass
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
if fd < 0:
raise Exception("Could not open child pty, " + child_name)
else:
os.close(fd)
# Verify we now have a controlling tty.
fd = os.open("/dev/tty", os.O_WRONLY)
if fd < 0:
raise Exception("Could not open controlling tty, /dev/tty")
else:
os.close(fd)
def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self.is_open:
raise SerialException("Port is already open.")
self.fd = None
# open
try:
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
except OSError as msg:
self.fd = None
raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
#~ fcntl.fcntl(self.fd, fcntl.F_SETFL, 0) # set blocking
try:
self._reconfigure_port(force_update=True)
except:
try:
os.close(self.fd)
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.fd = None
raise
else:
self.is_open = True
try:
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
except IOError as e:
if e.errno in (22, 25): # ignore Invalid argument and Inappropriate ioctl
pass
else:
raise
self.reset_input_buffer()
self.pipe_abort_read_r, self.pipe_abort_read_w = os.pipe()
self.pipe_abort_write_r, self.pipe_abort_write_w = os.pipe()
fcntl.fcntl(self.pipe_abort_read_r, fcntl.F_SETFL, os.O_NONBLOCK)
fcntl.fcntl(self.pipe_abort_write_r, fcntl.F_SETFL, os.O_NONBLOCK)
def pty_make_controlling_tty(tty_fd):
"""
This makes the pseudo-terminal the controlling tty. This should be
more portable than the pty.fork() function. Specifically, this should
work on Solaris.
Thanks to pexpect:
http://pexpect.sourceforge.net/pexpect.html
"""
child_name = os.ttyname(tty_fd)
# Disconnect from controlling tty. Harmless if not already connected.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
if fd >= 0:
os.close(fd)
# which exception, shouldnt' we catch explicitly .. ?
except:
# Already disconnected. This happens if running inside cron.
pass
os.setsid()
# Verify we are disconnected from controlling tty
# by attempting to open it again.
try:
fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY)
if fd >= 0:
os.close(fd)
raise Exception('Failed to disconnect from controlling '
'tty. It is still possible to open /dev/tty.')
# which exception, shouldnt' we catch explicitly .. ?
except:
# Good! We are disconnected from a controlling tty.
pass
# Verify we can open child pty.
fd = os.open(child_name, os.O_RDWR)
if fd < 0:
raise Exception("Could not open child pty, " + child_name)
else:
os.close(fd)
# Verify we now have a controlling tty.
if os.name != 'posix':
# Skip this on BSD-like systems since it will break.
fd = os.open("/dev/tty", os.O_WRONLY)
if fd < 0:
raise Exception("Could not open controlling tty, /dev/tty")
else:
os.close(fd)
