def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
python类BufferedWriter()的实例源码
def write(self, data):
"""Write a byte string to the file.
Returns the number of uncompressed bytes written, which is
always len(data). Note that due to buffering, the file on disk
may not reflect the data written until close() is called.
"""
with self._lock:
self._check_can_write()
# Convert data type if called by io.BufferedWriter.
if isinstance(data, memoryview):
data = data.tobytes()
compressed = self._compressor.compress(data)
self._fp.write(compressed)
self._pos += len(data)
return len(data)
# Rewind the file to the beginning of the data stream.
def __enter__(self):
self.writer = io.BufferedWriter(self.raw)
return self
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def download(self, index, subindex, data, force_segment=False):
"""May be called to make a write operation without an Object Dictionary.
:param int index:
Index of object to write.
:param int subindex:
Sub-index of object to write.
:param bytes data:
Data to be written.
:param bool force_segment:
Force use of segmented transfer regardless of data size.
:raises canopen.SdoCommunicationError:
On unexpected response or timeout.
:raises canopen.SdoAbortedError:
When node responds with an error.
"""
raw_stream = WritableStream(self, index, subindex, len(data), force_segment)
fp = io.BufferedWriter(raw_stream, 7)
fp.write(data)
fp.close()
def __init__(self, path=None, mode='wt', use_gzip=False):
self.mode = mode
if path is None:
self.name = "stdout"
if 'b' in mode:
self.fd = os.fdopen(sys.stdout.fileno(), 'wb')
else:
self.fd = sys.stdout
else:
self.name = os.path.basename(path)
abspath = os.path.abspath(path)
if not os.path.exists(os.path.dirname(abspath)):
os.makedirs(os.path.dirname(abspath))
if use_gzip:
_open = lambda p, m: io.BufferedWriter(gzip.open(p, m))
else:
_open = lambda p, m: io.open(p, m)
self.fd = _open(abspath, mode)
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def __init__(self, stream=None):
if not stream:
stream = BytesIO()
self.writer = BufferedWriter(stream)
self.written_count = 0
# region Writing
# "All numbers are written as little endian." |> Source: https://core.telegram.org/mtproto
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def __enter__(self):
self.writer = io.BufferedWriter(self.raw)
return self
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def read(self, size):
"""
Reads (receives) a whole block of size bytes from the connected peer.
:param size: the size of the block to be read.
:return: the read data with len(data) == size.
"""
if self._socket is None:
raise ConnectionResetError()
# TODO Remove the timeout from this method, always use previous one
with BufferedWriter(BytesIO(), buffer_size=size) as buffer:
bytes_left = size
while bytes_left != 0:
try:
partial = self._socket.recv(bytes_left)
except socket.timeout as e:
raise TimeoutError() from e
except OSError as e:
if e.errno == errno.EBADF or e.errno == errno.ENOTSOCK:
self._raise_connection_reset()
else:
raise
if len(partial) == 0:
self._raise_connection_reset()
buffer.write(partial)
bytes_left -= len(partial)
# If everything went fine, return the read bytes
buffer.flush()
return buffer.raw.getvalue()
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def isfileobj(f):
return isinstance(f, (io.FileIO, io.BufferedReader, io.BufferedWriter))
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
def backport_makefile(self, mode="r", buffering=None, encoding=None,
errors=None, newline=None):
"""
Backport of ``socket.makefile`` from Python 3.5.
"""
if not set(mode) <= set(["r", "w", "b"]):
raise ValueError(
"invalid mode %r (only r, w, b allowed)" % (mode,)
)
writing = "w" in mode
reading = "r" in mode or not writing
assert reading or writing
binary = "b" in mode
rawmode = ""
if reading:
rawmode += "r"
if writing:
rawmode += "w"
raw = SocketIO(self, rawmode)
self._makefile_refs += 1
if buffering is None:
buffering = -1
if buffering < 0:
buffering = io.DEFAULT_BUFFER_SIZE
if buffering == 0:
if not binary:
raise ValueError("unbuffered streams must be binary")
return raw
if reading and writing:
buffer = io.BufferedRWPair(raw, raw, buffering)
elif reading:
buffer = io.BufferedReader(raw, buffering)
else:
assert writing
buffer = io.BufferedWriter(raw, buffering)
if binary:
return buffer
text = io.TextIOWrapper(buffer, encoding, errors, newline)
text.mode = mode
return text
