def connect(self, address):
if self.timeout == 0.0:
return self._sock.connect(address)
sock = self._sock
if isinstance(address, tuple):
r = getaddrinfo(address[0], address[1], sock.family, sock.type, sock.proto)
address = r[0][-1]
if self.timeout is not None:
timer = Timeout.start_new(self.timeout, timeout('timed out'))
else:
timer = None
try:
while True:
err = sock.getsockopt(SOL_SOCKET, SO_ERROR)
if err:
raise error(err, strerror(err))
result = sock.connect_ex(address)
if not result or result == EISCONN:
break
elif (result in (EWOULDBLOCK, EINPROGRESS, EALREADY)) or (result == EINVAL and is_windows):
self._wait(self._write_event)
else:
raise error(result, strerror(result))
finally:
if timer is not None:
timer.cancel()
python类EALREADY的实例源码
def connect(self, address):
if isinstance(address, tuple) and len(address) == 2:
address = gethostbyname(address[0]), address[1]
if self.timeout == 0.0:
return self._sock.connect(address)
sock = self._sock
if self.timeout is None:
while True:
err = sock.getsockopt(SOL_SOCKET, SO_ERROR)
if err:
raise error(err, strerror(err))
result = sock.connect_ex(address)
if not result or result == EISCONN:
break
elif (result in (EWOULDBLOCK, EINPROGRESS, EALREADY)) or (result == EINVAL and is_windows):
wait_readwrite(sock.fileno(), event=self._rw_event)
else:
raise error(result, strerror(result))
else:
end = time.time() + self.timeout
while True:
err = sock.getsockopt(SOL_SOCKET, SO_ERROR)
if err:
raise error(err, strerror(err))
result = sock.connect_ex(address)
if not result or result == EISCONN:
break
elif (result in (EWOULDBLOCK, EINPROGRESS, EALREADY)) or (result == EINVAL and is_windows):
timeleft = end - time.time()
if timeleft <= 0:
raise timeout('timed out')
wait_readwrite(sock.fileno(), timeout=timeleft, event=self._rw_event)
else:
raise error(result, strerror(result))
def _connect(s, address):
try:
s.connect(address)
except socket.error:
(ty, v) = sys.exc_info()[:2]
if v[0] != errno.EINPROGRESS and \
v[0] != errno.EWOULDBLOCK and \
v[0] != errno.EALREADY:
raise v
def _connect(s, address):
try:
s.connect(address)
except socket.error:
(ty, v) = sys.exc_info()[:2]
if v[0] != errno.EINPROGRESS and \
v[0] != errno.EWOULDBLOCK and \
v[0] != errno.EALREADY:
raise v
def test_connect_timeout(_socket, conn):
assert conn.state is ConnectionStates.DISCONNECTED
# Initial connect returns EINPROGRESS
# immediate inline connect returns EALREADY
# second explicit connect returns EALREADY
# third explicit connect returns EALREADY and times out via last_attempt
_socket.connect_ex.side_effect = [EINPROGRESS, EALREADY, EALREADY, EALREADY]
conn.connect()
assert conn.state is ConnectionStates.CONNECTING
conn.connect()
assert conn.state is ConnectionStates.CONNECTING
conn.last_attempt = 0
conn.connect()
assert conn.state is ConnectionStates.DISCONNECTED
def connect(self, address):
if self.timeout == 0.0:
return self._sock.connect(address)
sock = self._sock
if isinstance(address, tuple):
r = getaddrinfo(address[0], address[1], sock.family, sock.type, sock.proto)
address = r[0][-1]
if self.timeout is not None:
timer = Timeout.start_new(self.timeout, timeout('timed out'))
else:
timer = None
try:
while True:
err = sock.getsockopt(SOL_SOCKET, SO_ERROR)
if err:
raise error(err, strerror(err))
result = sock.connect_ex(address)
if not result or result == EISCONN:
break
elif (result in (EWOULDBLOCK, EINPROGRESS, EALREADY)) or (result == EINVAL and is_windows):
self._wait(self._write_event)
else:
raise error(result, strerror(result))
finally:
if timer is not None:
timer.cancel()
def _connect(s, address):
try:
s.connect(address)
except socket.error:
(ty, v) = sys.exc_info()[:2]
if hasattr(v, 'errno'):
v_err = v.errno
else:
v_err = v[0]
if v_err not in [errno.EINPROGRESS, errno.EWOULDBLOCK, errno.EALREADY]:
raise v
def _connect(s, address):
try:
s.connect(address)
except socket.error:
(ty, v) = sys.exc_info()[:2]
if v[0] != errno.EINPROGRESS and \
v[0] != errno.EWOULDBLOCK and \
v[0] != errno.EALREADY:
raise v
def _connect(s, address):
try:
s.connect(address)
except socket.error:
(ty, v) = sys.exc_info()[:2]
if v[0] != errno.EINPROGRESS and \
v[0] != errno.EWOULDBLOCK and \
v[0] != errno.EALREADY:
raise v
def _connect(s, address):
try:
s.connect(address)
except socket.error:
(ty, v) = sys.exc_info()[:2]
if hasattr(v, 'errno'):
v_err = v.errno
else:
v_err = v[0]
if v_err not in [errno.EINPROGRESS, errno.EWOULDBLOCK, errno.EALREADY]:
raise v
def connect(self, address):
if self.timeout == 0.0:
return self._sock.connect(address)
sock = self._sock
if isinstance(address, tuple):
r = getaddrinfo(address[0], address[1], sock.family, sock.type, sock.proto)
address = r[0][-1]
if self.timeout is not None:
timer = Timeout.start_new(self.timeout, timeout('timed out'))
else:
timer = None
try:
while True:
err = sock.getsockopt(SOL_SOCKET, SO_ERROR)
if err:
raise error(err, strerror(err))
result = sock.connect_ex(address)
if not result or result == EISCONN:
break
elif (result in (EWOULDBLOCK, EINPROGRESS, EALREADY)) or (result == EINVAL and is_windows):
self._wait(self._write_event)
else:
raise error(result, strerror(result))
finally:
if timer is not None:
timer.cancel()
def connect(self, address):
if self.timeout == 0.0:
return self._sock.connect(address)
sock = self._sock
if isinstance(address, tuple):
r = getaddrinfo(address[0], address[1], sock.family, sock.type, sock.proto)
address = r[0][-1]
if self.timeout is not None:
timer = Timeout.start_new(self.timeout, timeout('timed out'))
else:
timer = None
try:
while True:
err = sock.getsockopt(SOL_SOCKET, SO_ERROR)
if err:
raise error(err, strerror(err))
result = sock.connect_ex(address)
if not result or result == EISCONN:
break
elif (result in (EWOULDBLOCK, EINPROGRESS, EALREADY)) or (result == EINVAL and is_windows):
self._wait(self._write_event)
else:
raise error(result, strerror(result))
finally:
if timer is not None:
timer.cancel()
def connect(self, address):
if isinstance(address, tuple) and len(address) == 2:
address = gethostbyname(address[0]), address[1]
if self.timeout == 0.0:
return self._sock.connect(address)
sock = self._sock
if self.timeout is None:
while True:
err = sock.getsockopt(SOL_SOCKET, SO_ERROR)
if err:
raise error(err, strerror(err))
result = sock.connect_ex(address)
if not result or result == EISCONN:
break
elif (result in (EWOULDBLOCK, EINPROGRESS, EALREADY)) or (result == EINVAL and is_windows):
wait_readwrite(sock.fileno(), event=self._rw_event)
else:
raise error(result, strerror(result))
else:
end = time.time() + self.timeout
while True:
err = sock.getsockopt(SOL_SOCKET, SO_ERROR)
if err:
raise error(err, strerror(err))
result = sock.connect_ex(address)
if not result or result == EISCONN:
break
elif (result in (EWOULDBLOCK, EINPROGRESS, EALREADY)) or (result == EINVAL and is_windows):
timeleft = end - time.time()
if timeleft <= 0:
raise timeout('timed out')
wait_readwrite(sock.fileno(), timeout=timeleft, event=self._rw_event)
else:
raise error(result, strerror(result))
def _connect(s, address):
try:
s.connect(address)
except socket.error:
(ty, v) = sys.exc_info()[:2]
if hasattr(v, 'errno'):
v_err = v.errno
else:
v_err = v[0]
if v_err not in [errno.EINPROGRESS, errno.EWOULDBLOCK, errno.EALREADY]:
raise v
def _connect(s, address):
try:
s.connect(address)
except socket.error:
(ty, v) = sys.exc_info()[:2]
if v[0] != errno.EINPROGRESS and \
v[0] != errno.EWOULDBLOCK and \
v[0] != errno.EALREADY:
raise v
def doConnect(self):
"""I connect the socket.
Then, call the protocol's makeConnection, and start waiting for data.
"""
if not hasattr(self, "connector"):
# this happens when connection failed but doConnect
# was scheduled via a callLater in self._finishInit
return
err = self.socket.getsockopt(socket.SOL_SOCKET, socket.SO_ERROR)
if err:
self.failIfNotConnected(error.getConnectError((err, os.strerror(err))))
return
# doConnect gets called twice. The first time we actually need to
# start the connection attempt. The second time we don't really
# want to (SO_ERROR above will have taken care of any errors, and if
# it reported none, the mere fact that doConnect was called again is
# sufficient to indicate that the connection has succeeded), but it
# is not /particularly/ detrimental to do so. This should get
# cleaned up some day, though.
try:
connectResult = self.socket.connect_ex(self.realAddress)
except socket.error, se:
connectResult = se.args[0]
if connectResult:
if connectResult == EISCONN:
pass
# on Windows EINVAL means sometimes that we should keep trying:
# http://msdn.microsoft.com/library/default.asp?url=/library/en-us/winsock/winsock/connect_2.asp
elif ((connectResult in (EWOULDBLOCK, EINPROGRESS, EALREADY)) or
(connectResult == EINVAL and platformType == "win32")):
self.startReading()
self.startWriting()
return
else:
self.failIfNotConnected(error.getConnectError((connectResult, os.strerror(connectResult))))
return
# If I have reached this point without raising or returning, that means
# that the socket is connected.
del self.doWrite
del self.doRead
# we first stop and then start, to reset any references to the old doRead
self.stopReading()
self.stopWriting()
self._connectDone()
def read(self, size=1):
"""\
Read size bytes from the serial port. If a timeout is set it may
return less characters as requested. With no timeout it will block
until the requested number of bytes is read.
"""
if not self.is_open:
raise portNotOpenError
read = bytearray()
timeout = Timeout(self._timeout)
while len(read) < size:
try:
ready, _, _ = select.select([self.fd, self.pipe_abort_read_r], [], [], timeout.time_left())
if self.pipe_abort_read_r in ready:
os.read(self.pipe_abort_read_r, 1000)
break
# If select was used with a timeout, and the timeout occurs, it
# returns with empty lists -> thus abort read operation.
# For timeout == 0 (non-blocking operation) also abort when
# there is nothing to read.
if not ready:
break # timeout
buf = os.read(self.fd, size - len(read))
# read should always return some data as select reported it was
# ready to read when we get to this point.
if not buf:
# Disconnected devices, at least on Linux, show the
# behavior that they are always ready to read immediately
# but reading returns nothing.
raise SerialException(
'device reports readiness to read but returned no data '
'(device disconnected or multiple access on port?)')
read.extend(buf)
except OSError as e:
# this is for Python 3.x where select.error is a subclass of
# OSError ignore BlockingIOErrors and EINTR. other errors are shown
# https://www.python.org/dev/peps/pep-0475.
if e.errno not in (errno.EAGAIN, errno.EALREADY, errno.EWOULDBLOCK, errno.EINPROGRESS, errno.EINTR):
raise SerialException('read failed: {}'.format(e))
except select.error as e:
# this is for Python 2.x
# ignore BlockingIOErrors and EINTR. all errors are shown
# see also http://www.python.org/dev/peps/pep-3151/#select
if e[0] not in (errno.EAGAIN, errno.EALREADY, errno.EWOULDBLOCK, errno.EINPROGRESS, errno.EINTR):
raise SerialException('read failed: {}'.format(e))
if timeout.expired():
break
return bytes(read)
def write(self, data):
"""Output the given byte string over the serial port."""
if not self.is_open:
raise portNotOpenError
d = to_bytes(data)
tx_len = length = len(d)
timeout = Timeout(self._write_timeout)
while tx_len > 0:
try:
n = os.write(self.fd, d)
if timeout.is_non_blocking:
# Zero timeout indicates non-blocking - simply return the
# number of bytes of data actually written
return n
elif not timeout.is_infinite:
# when timeout is set, use select to wait for being ready
# with the time left as timeout
if timeout.expired():
raise writeTimeoutError
abort, ready, _ = select.select([self.pipe_abort_write_r], [self.fd], [], timeout.time_left())
if abort:
os.read(self.pipe_abort_write_r, 1000)
break
if not ready:
raise writeTimeoutError
else:
assert timeout.time_left() is None
# wait for write operation
abort, ready, _ = select.select([self.pipe_abort_write_r], [self.fd], [], None)
if abort:
os.read(self.pipe_abort_write_r, 1)
break
if not ready:
raise SerialException('write failed (select)')
d = d[n:]
tx_len -= n
except SerialException:
raise
except OSError as e:
# this is for Python 3.x where select.error is a subclass of
# OSError ignore BlockingIOErrors and EINTR. other errors are shown
# https://www.python.org/dev/peps/pep-0475.
if e.errno not in (errno.EAGAIN, errno.EALREADY, errno.EWOULDBLOCK, errno.EINPROGRESS, errno.EINTR):
raise SerialException('write failed: {}'.format(e))
except select.error as e:
# this is for Python 2.x
# ignore BlockingIOErrors and EINTR. all errors are shown
# see also http://www.python.org/dev/peps/pep-3151/#select
if e[0] not in (errno.EAGAIN, errno.EALREADY, errno.EWOULDBLOCK, errno.EINPROGRESS, errno.EINTR):
raise SerialException('write failed: {}'.format(e))
if not timeout.is_non_blocking and timeout.expired():
raise writeTimeoutError
return length - len(d)
def write(self, data):
"""\
Output the given byte string over the serial port. Can block if the
connection is blocked. May raise SerialException if the connection is
closed.
"""
if not self.is_open:
raise portNotOpenError
d = to_bytes(data)
tx_len = length = len(d)
timeout = Timeout(self._write_timeout)
while tx_len > 0:
try:
n = self._socket.send(d)
if timeout.is_non_blocking:
# Zero timeout indicates non-blocking - simply return the
# number of bytes of data actually written
return n
elif not timeout.is_infinite:
# when timeout is set, use select to wait for being ready
# with the time left as timeout
if timeout.expired():
raise writeTimeoutError
_, ready, _ = select.select([], [self._socket], [], timeout.time_left())
if not ready:
raise writeTimeoutError
else:
assert timeout.time_left() is None
# wait for write operation
_, ready, _ = select.select([], [self._socket], [], None)
if not ready:
raise SerialException('write failed (select)')
d = d[n:]
tx_len -= n
except SerialException:
raise
except OSError as e:
# this is for Python 3.x where select.error is a subclass of
# OSError ignore BlockingIOErrors and EINTR. other errors are shown
# https://www.python.org/dev/peps/pep-0475.
if e.errno not in (errno.EAGAIN, errno.EALREADY, errno.EWOULDBLOCK, errno.EINPROGRESS, errno.EINTR):
raise SerialException('write failed: {}'.format(e))
except select.error as e:
# this is for Python 2.x
# ignore BlockingIOErrors and EINTR. all errors are shown
# see also http://www.python.org/dev/peps/pep-3151/#select
if e[0] not in (errno.EAGAIN, errno.EALREADY, errno.EWOULDBLOCK, errno.EINPROGRESS, errno.EINTR):
raise SerialException('write failed: {}'.format(e))
if not timeout.is_non_blocking and timeout.expired():
raise writeTimeoutError
return length - len(d)
def doConnect(self):
"""I connect the socket.
Then, call the protocol's makeConnection, and start waiting for data.
"""
if not hasattr(self, "connector"):
# this happens when connection failed but doConnect
# was scheduled via a callLater in self._finishInit
return
err = self.socket.getsockopt(socket.SOL_SOCKET, socket.SO_ERROR)
if err:
self.failIfNotConnected(error.getConnectError((err, os.strerror(err))))
return
# doConnect gets called twice. The first time we actually need to
# start the connection attempt. The second time we don't really
# want to (SO_ERROR above will have taken care of any errors, and if
# it reported none, the mere fact that doConnect was called again is
# sufficient to indicate that the connection has succeeded), but it
# is not /particularly/ detrimental to do so. This should get
# cleaned up some day, though.
try:
connectResult = self.socket.connect_ex(self.realAddress)
except socket.error, se:
connectResult = se.args[0]
if connectResult:
if connectResult == EISCONN:
pass
# on Windows EINVAL means sometimes that we should keep trying:
# http://msdn.microsoft.com/library/default.asp?url=/library/en-us/winsock/winsock/connect_2.asp
elif ((connectResult in (EWOULDBLOCK, EINPROGRESS, EALREADY)) or
(connectResult == EINVAL and platformType == "win32")):
self.startReading()
self.startWriting()
return
else:
self.failIfNotConnected(error.getConnectError((connectResult, os.strerror(connectResult))))
return
# If I have reached this point without raising or returning, that means
# that the socket is connected.
del self.doWrite
del self.doRead
# we first stop and then start, to reset any references to the old doRead
self.stopReading()
self.stopWriting()
self._connectDone()
