def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
python类Thread()的实例源码
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def test_make_msgid_collisions(self):
# Test make_msgid uniqueness, even with multiple threads
class MsgidsThread(Thread):
def run(self):
# generate msgids for 3 seconds
self.msgids = []
append = self.msgids.append
make_msgid = Utils.make_msgid
clock = time.time
tfin = clock() + 3.0
while clock() < tfin:
append(make_msgid())
threads = [MsgidsThread() for i in range(5)]
with start_threads(threads):
pass
all_ids = sum([t.msgids for t in threads], [])
self.assertEqual(len(set(all_ids)), len(all_ids))
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def test_make_msgid_collisions(self):
# Test make_msgid uniqueness, even with multiple threads
class MsgidsThread(Thread):
def run(self):
# generate msgids for 3 seconds
self.msgids = []
append = self.msgids.append
make_msgid = Utils.make_msgid
clock = time.time
tfin = clock() + 3.0
while clock() < tfin:
append(make_msgid())
threads = [MsgidsThread() for i in range(5)]
with start_threads(threads):
pass
all_ids = sum([t.msgids for t in threads], [])
self.assertEqual(len(set(all_ids)), len(all_ids))
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
def _reader(self, name, stream, outbuf):
"""
Thread runner for reading lines of from a subprocess into a buffer.
:param name: The logical name of the stream (used for logging only).
:param stream: The stream to read from. This will typically a pipe
connected to the output stream of a subprocess.
:param outbuf: The list to append the read lines to.
"""
while True:
s = stream.readline()
if not s:
break
s = s.decode('utf-8').rstrip()
outbuf.append(s)
logger.debug('%s: %s' % (name, s))
stream.close()
