Golang cmd-link-internal-ld.Linklookup类(方法)实例源码

下面列出了Golang cmd-link-internal-ld.Linklookup 类(方法)源码代码实例,从而了解它的用法。

作者:wheelcomple    项目:go-   
// Generate the glink resolver stub if necessary and return the .glink section
func ensureglinkresolver() *ld.LSym {
	glink := ld.Linklookup(ld.Ctxt, ".glink", 0)
	if glink.Size != 0 {
		return glink
	}

	// This is essentially the resolver from the ppc64 ELF ABI.
	// At entry, r12 holds the address of the symbol resolver stub
	// for the target routine and the argument registers hold the
	// arguments for the target routine.
	//
	// This stub is PIC, so first get the PC of label 1 into r11.
	// Other things will be relative to this.
	ld.Adduint32(ld.Ctxt, glink, 0x7c0802a6) // mflr r0
	ld.Adduint32(ld.Ctxt, glink, 0x429f0005) // bcl 20,31,1f
	ld.Adduint32(ld.Ctxt, glink, 0x7d6802a6) // 1: mflr r11
	ld.Adduint32(ld.Ctxt, glink, 0x7c0803a6) // mtlf r0

	// Compute the .plt array index from the entry point address.
	// Because this is PIC, everything is relative to label 1b (in
	// r11):
	//   r0 = ((r12 - r11) - (res_0 - r11)) / 4 = (r12 - res_0) / 4
	ld.Adduint32(ld.Ctxt, glink, 0x3800ffd0) // li r0,-(res_0-1b)=-48
	ld.Adduint32(ld.Ctxt, glink, 0x7c006214) // add r0,r0,r12
	ld.Adduint32(ld.Ctxt, glink, 0x7c0b0050) // sub r0,r0,r11
	ld.Adduint32(ld.Ctxt, glink, 0x7800f082) // srdi r0,r0,2

	// r11 = address of the first byte of the PLT
	r := ld.Addrel(glink)

	r.Off = int32(glink.Size)
	r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
	r.Siz = 8
	r.Type = obj.R_ADDRPOWER

	// addis r11,0,[email protected]; addi r11,r11,[email protected]
	r.Add = 0x3d600000<<32 | 0x396b0000

	glink.Size += 8

	// Load r12 = dynamic resolver address and r11 = DSO
	// identifier from the first two doublewords of the PLT.
	ld.Adduint32(ld.Ctxt, glink, 0xe98b0000) // ld r12,0(r11)
	ld.Adduint32(ld.Ctxt, glink, 0xe96b0008) // ld r11,8(r11)

	// Jump to the dynamic resolver
	ld.Adduint32(ld.Ctxt, glink, 0x7d8903a6) // mtctr r12
	ld.Adduint32(ld.Ctxt, glink, 0x4e800420) // bctr

	// The symbol resolvers must immediately follow.
	//   res_0:

	// Add DT_PPC64_GLINK .dynamic entry, which points to 32 bytes
	// before the first symbol resolver stub.
	s := ld.Linklookup(ld.Ctxt, ".dynamic", 0)

	ld.Elfwritedynentsymplus(s, ld.DT_PPC64_GLINK, glink, glink.Size-32)

	return glink
}

作者:srei    项目:g   
func elfsetupplt() {
	plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
	got := ld.Linklookup(ld.Ctxt, ".got.plt", 0)
	if plt.Size == 0 {
		// pushq got+8(IP)
		ld.Adduint8(ld.Ctxt, plt, 0xff)

		ld.Adduint8(ld.Ctxt, plt, 0x35)
		ld.Addpcrelplus(ld.Ctxt, plt, got, 8)

		// jmpq got+16(IP)
		ld.Adduint8(ld.Ctxt, plt, 0xff)

		ld.Adduint8(ld.Ctxt, plt, 0x25)
		ld.Addpcrelplus(ld.Ctxt, plt, got, 16)

		// nopl 0(AX)
		ld.Adduint32(ld.Ctxt, plt, 0x00401f0f)

		// assume got->size == 0 too
		ld.Addaddrplus(ld.Ctxt, got, ld.Linklookup(ld.Ctxt, ".dynamic", 0), 0)

		ld.Adduint64(ld.Ctxt, got, 0)
		ld.Adduint64(ld.Ctxt, got, 0)
	}
}

作者:SpiderOa    项目:g   
func elfsetupplt(ctxt *ld.Link) {
	plt := ld.Linklookup(ctxt, ".plt", 0)
	got := ld.Linklookup(ctxt, ".got.plt", 0)
	if plt.Size == 0 {
		// str lr, [sp, #-4]!
		ld.Adduint32(ctxt, plt, 0xe52de004)

		// ldr lr, [pc, #4]
		ld.Adduint32(ctxt, plt, 0xe59fe004)

		// add lr, pc, lr
		ld.Adduint32(ctxt, plt, 0xe08fe00e)

		// ldr pc, [lr, #8]!
		ld.Adduint32(ctxt, plt, 0xe5bef008)

		// .word &GLOBAL_OFFSET_TABLE[0] - .
		ld.Addpcrelplus(ctxt, plt, got, 4)

		// the first .plt entry requires 3 .plt.got entries
		ld.Adduint32(ctxt, got, 0)

		ld.Adduint32(ctxt, got, 0)
		ld.Adduint32(ctxt, got, 0)
	}
}

作者:PikeTheCro    项目:g   
func elfsetupplt() {
	plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
	got := ld.Linklookup(ld.Ctxt, ".got.plt", 0)
	if plt.Size == 0 {
		// pushl got+4
		ld.Adduint8(ld.Ctxt, plt, 0xff)

		ld.Adduint8(ld.Ctxt, plt, 0x35)
		ld.Addaddrplus(ld.Ctxt, plt, got, 4)

		// jmp *got+8
		ld.Adduint8(ld.Ctxt, plt, 0xff)

		ld.Adduint8(ld.Ctxt, plt, 0x25)
		ld.Addaddrplus(ld.Ctxt, plt, got, 8)

		// zero pad
		ld.Adduint32(ld.Ctxt, plt, 0)

		// assume got->size == 0 too
		ld.Addaddrplus(ld.Ctxt, got, ld.Linklookup(ld.Ctxt, ".dynamic", 0), 0)

		ld.Adduint32(ld.Ctxt, got, 0)
		ld.Adduint32(ld.Ctxt, got, 0)
	}
}

作者:Mokole    项目:g   
func genaddmoduledata() {
	addmoduledata := ld.Linkrlookup(ld.Ctxt, "runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		return
	}
	addmoduledata.Attr |= ld.AttrReachable
	initfunc := ld.Linklookup(ld.Ctxt, "go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Attr |= ld.AttrLocal
	initfunc.Attr |= ld.AttrReachable
	o := func(op uint32) {
		ld.Adduint32(ld.Ctxt, initfunc, op)
	}
	// addis r2, r12, [email protected]
	rel := ld.Addrel(initfunc)
	rel.Off = int32(initfunc.Size)
	rel.Siz = 8
	rel.Sym = ld.Linklookup(ld.Ctxt, ".TOC.", 0)
	rel.Type = obj.R_ADDRPOWER_PCREL
	o(0x3c4c0000)
	// addi r2, r2, [email protected]
	o(0x38420000)
	// mflr r31
	o(0x7c0802a6)
	// stdu r31, -32(r1)
	o(0xf801ffe1)
	// addis r3, r2, [email protected]@ha
	rel = ld.Addrel(initfunc)
	rel.Off = int32(initfunc.Size)
	rel.Siz = 8
	rel.Sym = ld.Linklookup(ld.Ctxt, "local.moduledata", 0)
	rel.Type = obj.R_ADDRPOWER_GOT
	o(0x3c620000)
	// ld r3, [email protected]@l(r3)
	o(0xe8630000)
	// bl runtime.addmoduledata
	rel = ld.Addrel(initfunc)
	rel.Off = int32(initfunc.Size)
	rel.Siz = 4
	rel.Sym = addmoduledata
	rel.Type = obj.R_CALLPOWER
	o(0x48000001)
	// nop
	o(0x60000000)
	// ld r31, 0(r1)
	o(0xe8010000)
	// mtlr r31
	o(0x7c0803a6)
	// addi r1,r1,32
	o(0x38210020)
	// blr
	o(0x4e800020)

	ld.Ctxt.Textp = append(ld.Ctxt.Textp, initfunc)
	initarray_entry := ld.Linklookup(ld.Ctxt, "go.link.addmoduledatainit", 0)
	initarray_entry.Attr |= ld.AttrReachable
	initarray_entry.Attr |= ld.AttrLocal
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ld.Ctxt, initarray_entry, initfunc)
}

作者:4a    项目:g   
func gentext() {
	if !ld.DynlinkingGo() {
		return
	}
	addmoduledata := ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}
	addmoduledata.Attr |= ld.AttrReachable
	initfunc := ld.Linklookup(ld.Ctxt, "go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Attr |= ld.AttrLocal
	initfunc.Attr |= ld.AttrReachable
	o := func(op uint32) {
		ld.Adduint32(ld.Ctxt, initfunc, op)
	}
	// 0000000000000000 <local.dso_init>:
	// 0:	90000000 	adrp	x0, 0 <runtime.firstmoduledata>
	// 	0: R_AARCH64_ADR_PREL_PG_HI21	local.moduledata
	// 4:	91000000 	add	x0, x0, #0x0
	// 	4: R_AARCH64_ADD_ABS_LO12_NC	local.moduledata
	o(0x90000000)
	o(0x91000000)
	rel := ld.Addrel(initfunc)
	rel.Off = 0
	rel.Siz = 8
	rel.Sym = ld.Ctxt.Moduledata
	rel.Type = obj.R_ADDRARM64

	// 8:	14000000 	bl	0 <runtime.addmoduledata>
	// 	8: R_AARCH64_CALL26	runtime.addmoduledata
	o(0x14000000)
	rel = ld.Addrel(initfunc)
	rel.Off = 8
	rel.Siz = 4
	rel.Sym = ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
	rel.Type = obj.R_CALLARM64 // Really should be R_AARCH64_JUMP26 but doesn't seem to make any difference

	if ld.Ctxt.Etextp != nil {
		ld.Ctxt.Etextp.Next = initfunc
	} else {
		ld.Ctxt.Textp = initfunc
	}
	ld.Ctxt.Etextp = initfunc
	initarray_entry := ld.Linklookup(ld.Ctxt, "go.link.addmoduledatainit", 0)
	initarray_entry.Attr |= ld.AttrReachable
	initarray_entry.Attr |= ld.AttrLocal
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ld.Ctxt, initarray_entry, initfunc)
}

作者:hurkg    项目:g   
// gentext generates assembly to append the local moduledata to the global
// moduledata linked list at initialization time. This is only done if the runtime
// is in a different module.
//
// <go.link.addmoduledata>:
// 	larl  %r2, <local.moduledata>
// 	jg    <[email protected]>
//	undef
//
// The job of appending the moduledata is delegated to runtime.addmoduledata.
func gentext(ctxt *ld.Link) {
	if !ld.DynlinkingGo() {
		return
	}
	addmoduledata := ld.Linklookup(ctxt, "runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}
	addmoduledata.Attr |= ld.AttrReachable
	initfunc := ld.Linklookup(ctxt, "go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Attr |= ld.AttrLocal
	initfunc.Attr |= ld.AttrReachable

	// larl %r2, <local.moduledata>
	ld.Adduint8(ctxt, initfunc, 0xc0)
	ld.Adduint8(ctxt, initfunc, 0x20)
	lmd := ld.Addrel(initfunc)
	lmd.Off = int32(initfunc.Size)
	lmd.Siz = 4
	lmd.Sym = ctxt.Moduledata
	lmd.Type = obj.R_PCREL
	lmd.Variant = ld.RV_390_DBL
	lmd.Add = 2 + int64(lmd.Siz)
	ld.Adduint32(ctxt, initfunc, 0)

	// jg <runtime.addmoduledata[@plt]>
	ld.Adduint8(ctxt, initfunc, 0xc0)
	ld.Adduint8(ctxt, initfunc, 0xf4)
	rel := ld.Addrel(initfunc)
	rel.Off = int32(initfunc.Size)
	rel.Siz = 4
	rel.Sym = ld.Linklookup(ctxt, "runtime.addmoduledata", 0)
	rel.Type = obj.R_CALL
	rel.Variant = ld.RV_390_DBL
	rel.Add = 2 + int64(rel.Siz)
	ld.Adduint32(ctxt, initfunc, 0)

	// undef (for debugging)
	ld.Adduint32(ctxt, initfunc, 0)

	ctxt.Textp = append(ctxt.Textp, initfunc)
	initarray_entry := ld.Linklookup(ctxt, "go.link.addmoduledatainit", 0)
	initarray_entry.Attr |= ld.AttrLocal
	initarray_entry.Attr |= ld.AttrReachable
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ctxt, initarray_entry, initfunc)
}

作者:hurkg    项目:g   
func elfsetupplt(ctxt *ld.Link) {
	plt := ld.Linklookup(ctxt, ".plt", 0)
	got := ld.Linklookup(ctxt, ".got", 0)
	if plt.Size == 0 {
		// stg     %r1,56(%r15)
		ld.Adduint8(ctxt, plt, 0xe3)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0xf0)
		ld.Adduint8(ctxt, plt, 0x38)
		ld.Adduint8(ctxt, plt, 0x00)
		ld.Adduint8(ctxt, plt, 0x24)
		// larl    %r1,_GLOBAL_OFFSET_TABLE_
		ld.Adduint8(ctxt, plt, 0xc0)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Addpcrelplus(ctxt, plt, got, 6)
		// mvc     48(8,%r15),8(%r1)
		ld.Adduint8(ctxt, plt, 0xd2)
		ld.Adduint8(ctxt, plt, 0x07)
		ld.Adduint8(ctxt, plt, 0xf0)
		ld.Adduint8(ctxt, plt, 0x30)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x08)
		// lg      %r1,16(%r1)
		ld.Adduint8(ctxt, plt, 0xe3)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x00)
		ld.Adduint8(ctxt, plt, 0x04)
		// br      %r1
		ld.Adduint8(ctxt, plt, 0x07)
		ld.Adduint8(ctxt, plt, 0xf1)
		// nopr    %r0
		ld.Adduint8(ctxt, plt, 0x07)
		ld.Adduint8(ctxt, plt, 0x00)
		// nopr    %r0
		ld.Adduint8(ctxt, plt, 0x07)
		ld.Adduint8(ctxt, plt, 0x00)
		// nopr    %r0
		ld.Adduint8(ctxt, plt, 0x07)
		ld.Adduint8(ctxt, plt, 0x00)

		// assume got->size == 0 too
		ld.Addaddrplus(ctxt, got, ld.Linklookup(ctxt, ".dynamic", 0), 0)

		ld.Adduint64(ctxt, got, 0)
		ld.Adduint64(ctxt, got, 0)
	}
}

作者:danny800    项目:g   
func gentext() {
	if !ld.DynlinkingGo() {
		return
	}
	addmoduledata := ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}
	addmoduledata.Reachable = true
	initfunc := ld.Linklookup(ld.Ctxt, "go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Local = true
	initfunc.Reachable = true
	o := func(op uint32) {
		ld.Adduint32(ld.Ctxt, initfunc, op)
	}
	o(0xe59f0004)
	o(0xe08f0000)

	o(0xeafffffe)
	rel := ld.Addrel(initfunc)
	rel.Off = 8
	rel.Siz = 4
	rel.Sym = ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
	rel.Type = obj.R_CALLARM
	rel.Add = 0xeafffffe // vomit

	o(0x00000000)
	rel = ld.Addrel(initfunc)
	rel.Off = 12
	rel.Siz = 4
	rel.Sym = ld.Ctxt.Moduledata
	rel.Type = obj.R_PCREL
	rel.Add = 4

	if ld.Ctxt.Etextp != nil {
		ld.Ctxt.Etextp.Next = initfunc
	} else {
		ld.Ctxt.Textp = initfunc
	}
	ld.Ctxt.Etextp = initfunc
	initarray_entry := ld.Linklookup(ld.Ctxt, "go.link.addmoduledatainit", 0)
	initarray_entry.Reachable = true
	initarray_entry.Local = true
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ld.Ctxt, initarray_entry, initfunc)
}

作者:PikeTheCro    项目:g   
func gentext() {
	if !ld.DynlinkingGo() && ld.Buildmode != ld.BuildmodePIE {
		return
	}

	thunkfunc := ld.Linklookup(ld.Ctxt, "__x86.get_pc_thunk.cx", 0)
	thunkfunc.Type = obj.STEXT
	thunkfunc.Local = true
	thunkfunc.Reachable = true
	o := func(op ...uint8) {
		for _, op1 := range op {
			ld.Adduint8(ld.Ctxt, thunkfunc, op1)
		}
	}
	// 8b 0c 24	mov    (%esp),%ecx
	o(0x8b, 0x0c, 0x24)
	// c3		ret
	o(0xc3)

	if ld.Ctxt.Etextp != nil {
		ld.Ctxt.Etextp.Next = thunkfunc
	} else {
		ld.Ctxt.Textp = thunkfunc
	}
	ld.Ctxt.Etextp = thunkfunc
}

作者:SpiderOa    项目:g   
func addgotsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Got >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)
	got := ld.Linklookup(ctxt, ".got", 0)
	s.Got = int32(got.Size)
	ld.Adduint32(ctxt, got, 0)

	if ld.Iself {
		rel := ld.Linklookup(ctxt, ".rel", 0)
		ld.Addaddrplus(ctxt, rel, got, int64(s.Got))
		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_ARM_GLOB_DAT))
	} else {
		ctxt.Diag("addgotsym: unsupported binary format")
	}
}

作者:SpiderOa    项目:g   
func gentext(ctxt *ld.Link) {
	if !ld.DynlinkingGo() {
		return
	}
	addmoduledata := ld.Linklookup(ctxt, "runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}
	addmoduledata.Attr |= ld.AttrReachable
	initfunc := ld.Linklookup(ctxt, "go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Attr |= ld.AttrLocal
	initfunc.Attr |= ld.AttrReachable
	o := func(op uint32) {
		ld.Adduint32(ctxt, initfunc, op)
	}
	o(0xe59f0004)
	o(0xe08f0000)

	o(0xeafffffe)
	rel := ld.Addrel(initfunc)
	rel.Off = 8
	rel.Siz = 4
	rel.Sym = ld.Linklookup(ctxt, "runtime.addmoduledata", 0)
	rel.Type = obj.R_CALLARM
	rel.Add = 0xeafffffe // vomit

	o(0x00000000)
	rel = ld.Addrel(initfunc)
	rel.Off = 12
	rel.Siz = 4
	rel.Sym = ctxt.Moduledata
	rel.Type = obj.R_PCREL
	rel.Add = 4

	ctxt.Textp = append(ctxt.Textp, initfunc)
	initarray_entry := ld.Linklookup(ctxt, "go.link.addmoduledatainit", 0)
	initarray_entry.Attr |= ld.AttrReachable
	initarray_entry.Attr |= ld.AttrLocal
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ctxt, initarray_entry, initfunc)
}

作者:Mokole    项目:g   
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		rela := ld.Linklookup(ctxt, ".rela.plt", 0)
		if plt.Size == 0 {
			elfsetupplt()
		}

		// Create the glink resolver if necessary
		glink := ensureglinkresolver()

		// Write symbol resolver stub (just a branch to the
		// glink resolver stub)
		r := ld.Addrel(glink)

		r.Sym = glink
		r.Off = int32(glink.Size)
		r.Siz = 4
		r.Type = obj.R_CALLPOWER
		ld.Adduint32(ctxt, glink, 0x48000000) // b .glink

		// In the ppc64 ABI, the dynamic linker is responsible
		// for writing the entire PLT.  We just need to
		// reserve 8 bytes for each PLT entry and generate a
		// JMP_SLOT dynamic relocation for it.
		//
		// TODO(austin): ABI v1 is different
		s.Plt = int32(plt.Size)

		plt.Size += 8

		ld.Addaddrplus(ctxt, rela, plt, int64(s.Plt))
		ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_PPC64_JMP_SLOT))
		ld.Adduint64(ctxt, rela, 0)
	} else {
		ld.Diag("addpltsym: unsupported binary format")
	}
}

作者:jonmorehous    项目:g   
func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
	if ld.Linkmode == ld.LinkExternal {
		// TODO(minux): translate R_ADDRPOWER and R_CALLPOWER into standard ELF relocations.
		// R_ADDRPOWER corresponds to R_PPC_ADDR16_HA and R_PPC_ADDR16_LO.
		// R_CALLPOWER corresponds to R_PPC_REL24.
		return -1
	}

	switch r.Type {
	case obj.R_CONST:
		*val = r.Add
		return 0

	case obj.R_GOTOFF:
		*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
		return 0

	case obj.R_ADDRPOWER, obj.R_ADDRPOWER_DS:
		return archrelocaddr(r, s, val)

	case obj.R_CALLPOWER:
		// Bits 6 through 29 = (S + A - P) >> 2

		t := ld.Symaddr(r.Sym) + r.Add - (s.Value + int64(r.Off))
		if t&3 != 0 {
			ld.Ctxt.Diag("relocation for %s+%d is not aligned: %d", r.Sym.Name, r.Off, t)
		}
		if int64(int32(t<<6)>>6) != t {
			// TODO(austin) This can happen if text > 32M.
			// Add a call trampoline to .text in that case.
			ld.Ctxt.Diag("relocation for %s+%d is too big: %d", r.Sym.Name, r.Off, t)
		}

		*val |= int64(uint32(t) &^ 0xfc000003)
		return 0

	case obj.R_POWER_TOC: // S + A - .TOC.
		*val = ld.Symaddr(r.Sym) + r.Add - symtoc(s)

		return 0

	case obj.R_POWER_TLS_LE:
		// The thread pointer points 0x7000 bytes after the start of the the
		// thread local storage area as documented in section "3.7.2 TLS
		// Runtime Handling" of "Power Architecture 64-Bit ELF V2 ABI
		// Specification".
		v := r.Sym.Value - 0x7000
		if int64(int16(v)) != v {
			ld.Diag("TLS offset out of range %d", v)
		}
		*val = (*val &^ 0xffff) | (v & 0xffff)
		return 0
	}

	return -1
}

作者:Mokole    项目:g   
func addgotsym(s *ld.Symbol) {
	if s.Got >= 0 {
		return
	}

	ld.Adddynsym(ld.Ctxt, s)
	got := ld.Linklookup(ld.Ctxt, ".got", 0)
	s.Got = int32(got.Size)
	ld.Adduint64(ld.Ctxt, got, 0)

	if ld.Iself {
		rela := ld.Linklookup(ld.Ctxt, ".rela", 0)
		ld.Addaddrplus(ld.Ctxt, rela, got, int64(s.Got))
		ld.Adduint64(ld.Ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_390_GLOB_DAT))
		ld.Adduint64(ld.Ctxt, rela, 0)
	} else {
		ld.Diag("addgotsym: unsupported binary format")
	}
}

作者:srei    项目:g   
func gentext() {
	if !ld.DynlinkingGo() {
		return
	}
	addmoduledata := ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}
	addmoduledata.Reachable = true
	initfunc := ld.Linklookup(ld.Ctxt, "go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Local = true
	initfunc.Reachable = true
	o := func(op ...uint8) {
		for _, op1 := range op {
			ld.Adduint8(ld.Ctxt, initfunc, op1)
		}
	}
	// 0000000000000000 <local.dso_init>:
	//    0:	48 8d 3d 00 00 00 00 	lea    0x0(%rip),%rdi        # 7 <local.dso_init+0x7>
	// 			3: R_X86_64_PC32	runtime.firstmoduledata-0x4
	o(0x48, 0x8d, 0x3d)
	ld.Addpcrelplus(ld.Ctxt, initfunc, ld.Ctxt.Moduledata, 0)
	//    7:	e8 00 00 00 00       	callq  c <local.dso_init+0xc>
	// 			8: R_X86_64_PLT32	runtime.addmoduledata-0x4
	o(0xe8)
	Addcall(ld.Ctxt, initfunc, addmoduledata)
	//    c:	c3                   	retq
	o(0xc3)
	if ld.Ctxt.Etextp != nil {
		ld.Ctxt.Etextp.Next = initfunc
	} else {
		ld.Ctxt.Textp = initfunc
	}
	ld.Ctxt.Etextp = initfunc
	initarray_entry := ld.Linklookup(ld.Ctxt, "go.link.addmoduledatainit", 0)
	initarray_entry.Reachable = true
	initarray_entry.Local = true
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ld.Ctxt, initarray_entry, initfunc)
}

作者:Mokole    项目:g   
func elfsetupplt() {
	plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
	if plt.Size == 0 {
		// The dynamic linker stores the address of the
		// dynamic resolver and the DSO identifier in the two
		// doublewords at the beginning of the .plt section
		// before the PLT array. Reserve space for these.
		plt.Size = 16
	}
}

作者:PikeTheCro    项目:g   
func addgotsym(ctxt *ld.Link, s *ld.LSym) {
	if s.Got >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)
	got := ld.Linklookup(ctxt, ".got", 0)
	s.Got = int32(got.Size)
	ld.Adduint32(ctxt, got, 0)

	if ld.Iself {
		rel := ld.Linklookup(ctxt, ".rel", 0)
		ld.Addaddrplus(ctxt, rel, got, int64(s.Got))
		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_386_GLOB_DAT))
	} else if ld.HEADTYPE == obj.Hdarwin {
		ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.got", 0), uint32(s.Dynid))
	} else {
		ld.Diag("addgotsym: unsupported binary format")
	}
}

作者:PikeTheCro    项目:g   
func addpltsym(ctxt *ld.Link, s *ld.LSym) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		got := ld.Linklookup(ctxt, ".got.plt", 0)
		rel := ld.Linklookup(ctxt, ".rel.plt", 0)
		if plt.Size == 0 {
			elfsetupplt()
		}

		// jmpq *got+size
		ld.Adduint8(ctxt, plt, 0xff)

		ld.Adduint8(ctxt, plt, 0x25)
		ld.Addaddrplus(ctxt, plt, got, got.Size)

		// add to got: pointer to current pos in plt
		ld.Addaddrplus(ctxt, got, plt, plt.Size)

		// pushl $x
		ld.Adduint8(ctxt, plt, 0x68)

		ld.Adduint32(ctxt, plt, uint32(rel.Size))

		// jmp .plt
		ld.Adduint8(ctxt, plt, 0xe9)

		ld.Adduint32(ctxt, plt, uint32(-(plt.Size + 4)))

		// rel
		ld.Addaddrplus(ctxt, rel, got, got.Size-4)

		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_386_JMP_SLOT))

		s.Plt = int32(plt.Size - 16)
	} else if ld.HEADTYPE == obj.Hdarwin {
		// Same laziness as in 6l.

		plt := ld.Linklookup(ctxt, ".plt", 0)

		addgotsym(ctxt, s)

		ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.plt", 0), uint32(s.Dynid))

		// jmpq *got+size(IP)
		s.Plt = int32(plt.Size)

		ld.Adduint8(ctxt, plt, 0xff)
		ld.Adduint8(ctxt, plt, 0x25)
		ld.Addaddrplus(ctxt, plt, ld.Linklookup(ctxt, ".got", 0), int64(s.Got))
	} else {
		ld.Diag("addpltsym: unsupported binary format")
	}
}

作者:SpiderOa    项目:g   
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		got := ld.Linklookup(ctxt, ".got.plt", 0)
		rel := ld.Linklookup(ctxt, ".rel.plt", 0)
		if plt.Size == 0 {
			elfsetupplt(ctxt)
		}

		// .got entry
		s.Got = int32(got.Size)

		// In theory, all GOT should point to the first PLT entry,
		// Linux/ARM's dynamic linker will do that for us, but FreeBSD/ARM's
		// dynamic linker won't, so we'd better do it ourselves.
		ld.Addaddrplus(ctxt, got, plt, 0)

		// .plt entry, this depends on the .got entry
		s.Plt = int32(plt.Size)

		addpltreloc(ctxt, plt, got, s, obj.R_PLT0) // add lr, pc, #0xXX00000
		addpltreloc(ctxt, plt, got, s, obj.R_PLT1) // add lr, lr, #0xYY000
		addpltreloc(ctxt, plt, got, s, obj.R_PLT2) // ldr pc, [lr, #0xZZZ]!

		// rel
		ld.Addaddrplus(ctxt, rel, got, int64(s.Got))

		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_ARM_JUMP_SLOT))
	} else {
		ctxt.Diag("addpltsym: unsupported binary format")
	}
}


问题


面经


文章

微信
公众号

扫码关注公众号