Golang bootstrap-compile-internal-gc.Nodreg类(方法)实例源码

/*
 * generate division.
 * generates one of:
 *	res = nl / nr
 *	res = nl % nr
 * according to op.
 */
func dodiv(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	t := nl.Type

	t0 := t

	if t.Width < 8 {
		if gc.Issigned[t.Etype] {
			t = gc.Types[gc.TINT64]
		} else {
			t = gc.Types[gc.TUINT64]
		}
	}

	a := optoas(gc.ODIV, t)

	var tl gc.Node
	gc.Regalloc(&tl, t0, nil)
	var tr gc.Node
	gc.Regalloc(&tr, t0, nil)
	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &tl)
		gc.Cgen(nr, &tr)
	} else {
		gc.Cgen(nr, &tr)
		gc.Cgen(nl, &tl)
	}

	if t != t0 {
		// Convert
		tl2 := tl

		tr2 := tr
		tl.Type = t
		tr.Type = t
		gmove(&tl2, &tl)
		gmove(&tr2, &tr)
	}

	// Handle divide-by-zero panic.
	p1 := ginsbranch(mips.ABNE, nil, &tr, nil, 0)
	if panicdiv == nil {
		panicdiv = gc.Sysfunc("panicdivide")
	}
	gc.Ginscall(panicdiv, -1)
	gc.Patch(p1, gc.Pc)

	gins3(a, &tr, &tl, nil)
	gc.Regfree(&tr)
	if op == gc.ODIV {
		var lo gc.Node
		gc.Nodreg(&lo, gc.Types[gc.TUINT64], mips.REG_LO)
		gins(mips.AMOVV, &lo, &tl)
	} else { // remainder in REG_HI
		var hi gc.Node
		gc.Nodreg(&hi, gc.Types[gc.TUINT64], mips.REG_HI)
		gins(mips.AMOVV, &hi, &tl)
	}
	gmove(&tl, res)
	gc.Regfree(&tl)
}

/*
 * generate high multiply:
 *   res = (nl*nr) >> width
 */
func cgen_hmul(nl *gc.Node, nr *gc.Node, res *gc.Node) {
	t := nl.Type
	a := optoas(gc.OHMUL, t)
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	var n1 gc.Node
	gc.Cgenr(nl, &n1, res)
	var n2 gc.Node
	gc.Cgenr(nr, &n2, nil)
	var ax, oldax, dx, olddx gc.Node
	savex(x86.REG_AX, &ax, &oldax, res, gc.Types[gc.TUINT64])
	savex(x86.REG_DX, &dx, &olddx, res, gc.Types[gc.TUINT64])
	gmove(&n1, &ax)
	gins(a, &n2, nil)
	gc.Regfree(&n2)
	gc.Regfree(&n1)

	if t.Width == 1 {
		// byte multiply behaves differently.
		var byteAH, byteDX gc.Node
		gc.Nodreg(&byteAH, t, x86.REG_AH)
		gc.Nodreg(&byteDX, t, x86.REG_DX)
		gmove(&byteAH, &byteDX)
	}
	gmove(&dx, res)

	restx(&ax, &oldax)
	restx(&dx, &olddx)
}

/*
 * generate
 *	as $c, reg
 */
func gconreg(as int, c int64, reg int) {
	var nr gc.Node

	switch as {
	case x86.AADDL,
		x86.AMOVL,
		x86.ALEAL:
		gc.Nodreg(&nr, gc.Types[gc.TINT32], reg)

	default:
		gc.Nodreg(&nr, gc.Types[gc.TINT64], reg)
	}

	ginscon(as, c, &nr)
}

func ginsnop() {
	// This is actually not the x86 NOP anymore,
	// but at the point where it gets used, AX is dead
	// so it's okay if we lose the high bits.
	var reg gc.Node
	gc.Nodreg(&reg, gc.Types[gc.TINT], x86.REG_AX)
	gins(x86.AXCHGL, &reg, &reg)
}

// floating-point.  387 (not SSE2)
func cgen_float387(n *gc.Node, res *gc.Node) {
	var f0 gc.Node
	var f1 gc.Node

	nl := n.Left
	nr := n.Right
	gc.Nodreg(&f0, nl.Type, x86.REG_F0)
	gc.Nodreg(&f1, n.Type, x86.REG_F0+1)
	if nr != nil {
		// binary
		if nl.Ullman >= nr.Ullman {
			gc.Cgen(nl, &f0)
			if nr.Addable {
				gins(foptoas(n.Op, n.Type, 0), nr, &f0)
			} else {
				gc.Cgen(nr, &f0)
				gins(foptoas(n.Op, n.Type, Fpop), &f0, &f1)
			}
		} else {
			gc.Cgen(nr, &f0)
			if nl.Addable {
				gins(foptoas(n.Op, n.Type, Frev), nl, &f0)
			} else {
				gc.Cgen(nl, &f0)
				gins(foptoas(n.Op, n.Type, Frev|Fpop), &f0, &f1)
			}
		}

		gmove(&f0, res)
		return
	}

	// unary
	gc.Cgen(nl, &f0)

	if n.Op != gc.OCONV && n.Op != gc.OPLUS {
		gins(foptoas(n.Op, n.Type, 0), nil, nil)
	}
	gmove(&f0, res)
	return
}

/*
 * generate byte multiply:
 *	res = nl * nr
 * there is no 2-operand byte multiply instruction so
 * we do a full-width multiplication and truncate afterwards.
 */
func cgen_bmul(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node) bool {
	if optoas(op, nl.Type) != x86.AIMULB {
		return false
	}

	// largest ullman on left.
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	// generate operands in "8-bit" registers.
	var n1b gc.Node
	gc.Regalloc(&n1b, nl.Type, res)

	gc.Cgen(nl, &n1b)
	var n2b gc.Node
	gc.Regalloc(&n2b, nr.Type, nil)
	gc.Cgen(nr, &n2b)

	// perform full-width multiplication.
	t := gc.Types[gc.TUINT64]

	if gc.Issigned[nl.Type.Etype] {
		t = gc.Types[gc.TINT64]
	}
	var n1 gc.Node
	gc.Nodreg(&n1, t, int(n1b.Reg))
	var n2 gc.Node
	gc.Nodreg(&n2, t, int(n2b.Reg))
	a := optoas(op, t)
	gins(a, &n2, &n1)

	// truncate.
	gmove(&n1, res)

	gc.Regfree(&n1b)
	gc.Regfree(&n2b)
	return true
}

func savex(dr int, x *gc.Node, oldx *gc.Node, res *gc.Node, t *gc.Type) {
	r := gc.GetReg(dr)
	gc.Nodreg(x, gc.Types[gc.TINT32], dr)

	// save current ax and dx if they are live
	// and not the destination
	*oldx = gc.Node{}

	if r > 0 && !gc.Samereg(x, res) {
		gc.Tempname(oldx, gc.Types[gc.TINT32])
		gmove(x, oldx)
	}

	gc.Regalloc(x, t, x)
}

func blockcopy(n, ns *gc.Node, osrc, odst, w int64) {
	var noddi gc.Node
	gc.Nodreg(&noddi, gc.Types[gc.Tptr], x86.REG_DI)
	var nodsi gc.Node
	gc.Nodreg(&nodsi, gc.Types[gc.Tptr], x86.REG_SI)

	var nodl gc.Node
	var nodr gc.Node
	if n.Ullman >= ns.Ullman {
		gc.Agenr(n, &nodr, &nodsi)
		if ns.Op == gc.ONAME {
			gc.Gvardef(ns)
		}
		gc.Agenr(ns, &nodl, &noddi)
	} else {
		if ns.Op == gc.ONAME {
			gc.Gvardef(ns)
		}
		gc.Agenr(ns, &nodl, &noddi)
		gc.Agenr(n, &nodr, &nodsi)
	}

	if nodl.Reg != x86.REG_DI {
		gmove(&nodl, &noddi)
	}
	if nodr.Reg != x86.REG_SI {
		gmove(&nodr, &nodsi)
	}
	gc.Regfree(&nodl)
	gc.Regfree(&nodr)

	c := w % 8 // bytes
	q := w / 8 // quads

	var oldcx gc.Node
	var cx gc.Node
	savex(x86.REG_CX, &cx, &oldcx, nil, gc.Types[gc.TINT64])

	// if we are copying forward on the stack and
	// the src and dst overlap, then reverse direction
	if osrc < odst && odst < osrc+w {
		// reverse direction
		gins(x86.ASTD, nil, nil) // set direction flag
		if c > 0 {
			gconreg(addptr, w-1, x86.REG_SI)
			gconreg(addptr, w-1, x86.REG_DI)

			gconreg(movptr, c, x86.REG_CX)
			gins(x86.AREP, nil, nil)   // repeat
			gins(x86.AMOVSB, nil, nil) // MOVB *(SI)-,*(DI)-
		}

		if q > 0 {
			if c > 0 {
				gconreg(addptr, -7, x86.REG_SI)
				gconreg(addptr, -7, x86.REG_DI)
			} else {
				gconreg(addptr, w-8, x86.REG_SI)
				gconreg(addptr, w-8, x86.REG_DI)
			}

			gconreg(movptr, q, x86.REG_CX)
			gins(x86.AREP, nil, nil)   // repeat
			gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)-,*(DI)-
		}

		// we leave with the flag clear
		gins(x86.ACLD, nil, nil)
	} else {
		// normal direction
		if q > 128 || (gc.Nacl && q >= 4) || (obj.Getgoos() == "plan9" && q >= 4) {
			gconreg(movptr, q, x86.REG_CX)
			gins(x86.AREP, nil, nil)   // repeat
			gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
		} else if q >= 4 {
			var oldx0 gc.Node
			var x0 gc.Node
			savex(x86.REG_X0, &x0, &oldx0, nil, gc.Types[gc.TFLOAT64])

			p := gins(obj.ADUFFCOPY, nil, nil)
			p.To.Type = obj.TYPE_ADDR
			p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))

			// 64 blocks taking 14 bytes each
			// see ../../../../runtime/mkduff.go
			p.To.Offset = 14 * (64 - q/2)
			restx(&x0, &oldx0)

			if q%2 != 0 {
				gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
			}
		} else if !gc.Nacl && c == 0 {
			// We don't need the MOVSQ side-effect of updating SI and DI,
			// and issuing a sequence of MOVQs directly is faster.
			nodsi.Op = gc.OINDREG

			noddi.Op = gc.OINDREG
			for q > 0 {
				gmove(&nodsi, &cx) // MOVQ x+(SI),CX
				gmove(&cx, &noddi) // MOVQ CX,x+(DI)
//.........这里部分代码省略.........

func ginsnop() {
	var reg gc.Node
	gc.Nodreg(&reg, gc.Types[gc.TINT], mips.REG_R0)
	gins(mips.ANOR, &reg, &reg)
}

//.........这里部分代码省略.........
		gc.TFLOAT32<<16 | gc.TINT16,
		gc.TFLOAT32<<16 | gc.TINT8,
		gc.TFLOAT32<<16 | gc.TUINT16,
		gc.TFLOAT32<<16 | gc.TUINT8,
		gc.TFLOAT64<<16 | gc.TINT16,
		gc.TFLOAT64<<16 | gc.TINT8,
		gc.TFLOAT64<<16 | gc.TUINT16,
		gc.TFLOAT64<<16 | gc.TUINT8,
		gc.TFLOAT32<<16 | gc.TUINT32,
		gc.TFLOAT64<<16 | gc.TUINT32,
		gc.TFLOAT32<<16 | gc.TUINT64,
		gc.TFLOAT64<<16 | gc.TUINT64:
		bignodes()

		gc.Regalloc(&r1, gc.Types[gc.TFLOAT64], nil)
		gmove(f, &r1)
		if tt == gc.TUINT64 {
			gc.Regalloc(&r2, gc.Types[gc.TFLOAT64], nil)
			gmove(&bigf, &r2)
			gins3(mips.ACMPGED, &r1, &r2, nil)
			p1 := gc.Gbranch(mips.ABFPF, nil, 0)
			gins(mips.ASUBD, &r2, &r1)
			gc.Patch(p1, gc.Pc)
			gc.Regfree(&r2)
		}

		gc.Regalloc(&r2, gc.Types[gc.TINT64], t)
		gins(mips.ATRUNCDV, &r1, &r1)
		gins(mips.AMOVV, &r1, &r2)
		gc.Regfree(&r1)

		if tt == gc.TUINT64 {
			p1 := gc.Gbranch(mips.ABFPF, nil, 0) // use FCR0 here again
			gc.Nodreg(&r1, gc.Types[gc.TINT64], mips.REGTMP)
			gmove(&bigi, &r1)
			gins(mips.AADDVU, &r1, &r2)
			gc.Patch(p1, gc.Pc)
		}

		gmove(&r2, t)
		gc.Regfree(&r2)
		return

		//warn("gmove: convert int to float not implemented: %N -> %N\n", f, t);
	//return;
	// algorithm is:
	//	if small enough, use native int64 -> float64 conversion.
	//	otherwise, halve (rounding to odd?), convert, and double.
	/*
	 * integer to float
	 */
	case gc.TINT32<<16 | gc.TFLOAT32,
		gc.TINT32<<16 | gc.TFLOAT64,
		gc.TINT64<<16 | gc.TFLOAT32,
		gc.TINT64<<16 | gc.TFLOAT64,
		gc.TINT16<<16 | gc.TFLOAT32,
		gc.TINT16<<16 | gc.TFLOAT64,
		gc.TINT8<<16 | gc.TFLOAT32,
		gc.TINT8<<16 | gc.TFLOAT64,
		gc.TUINT16<<16 | gc.TFLOAT32,
		gc.TUINT16<<16 | gc.TFLOAT64,
		gc.TUINT8<<16 | gc.TFLOAT32,
		gc.TUINT8<<16 | gc.TFLOAT64,
		gc.TUINT32<<16 | gc.TFLOAT32,
		gc.TUINT32<<16 | gc.TFLOAT64,
		gc.TUINT64<<16 | gc.TFLOAT32,

/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op gc.Op, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	a := optoas(op, nl.Type)

	if nr.Op == gc.OLITERAL {
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gc.Cgen(nl, &n1)
		sc := uint64(nr.Int())
		if sc >= uint64(nl.Type.Width*8) {
			// large shift gets 2 shifts by width-1
			var n3 gc.Node
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)

			gins(a, &n3, &n1)
			gins(a, &n3, &n1)
		} else {
			gins(a, nr, &n1)
		}
		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	if nl.Ullman >= gc.UINF {
		var n4 gc.Node
		gc.Tempname(&n4, nl.Type)
		gc.Cgen(nl, &n4)
		nl = &n4
	}

	if nr.Ullman >= gc.UINF {
		var n5 gc.Node
		gc.Tempname(&n5, nr.Type)
		gc.Cgen(nr, &n5)
		nr = &n5
	}

	rcx := gc.GetReg(x86.REG_CX)
	var n1 gc.Node
	gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)

	// Allow either uint32 or uint64 as shift type,
	// to avoid unnecessary conversion from uint32 to uint64
	// just to do the comparison.
	tcount := gc.Types[gc.Simtype[nr.Type.Etype]]

	if tcount.Etype < gc.TUINT32 {
		tcount = gc.Types[gc.TUINT32]
	}

	gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
	var n3 gc.Node
	gc.Regalloc(&n3, tcount, &n1) // to clear high bits of CX

	var cx gc.Node
	gc.Nodreg(&cx, gc.Types[gc.TUINT64], x86.REG_CX)

	var oldcx gc.Node
	if rcx > 0 && !gc.Samereg(&cx, res) {
		gc.Regalloc(&oldcx, gc.Types[gc.TUINT64], nil)
		gmove(&cx, &oldcx)
	}

	cx.Type = tcount

	var n2 gc.Node
	if gc.Samereg(&cx, res) {
		gc.Regalloc(&n2, nl.Type, nil)
	} else {
		gc.Regalloc(&n2, nl.Type, res)
	}
	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &n2)
		gc.Cgen(nr, &n1)
		gmove(&n1, &n3)
	} else {
		gc.Cgen(nr, &n1)
		gmove(&n1, &n3)
		gc.Cgen(nl, &n2)
	}

	gc.Regfree(&n3)

	// test and fix up large shifts
	if !bounded {
		gc.Nodconst(&n3, tcount, nl.Type.Width*8)
		gins(optoas(gc.OCMP, tcount), &n1, &n3)
		p1 := gc.Gbranch(optoas(gc.OLT, tcount), nil, +1)
		if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
			gins(a, &n3, &n2)
		} else {
			gc.Nodconst(&n3, nl.Type, 0)
			gmove(&n3, &n2)
		}
//.........这里部分代码省略.........

func floatmove_387(f *gc.Node, t *gc.Node) {
	var r1 gc.Node
	var a int

	ft := gc.Simsimtype(f.Type)
	tt := gc.Simsimtype(t.Type)
	cvt := t.Type

	switch uint32(ft)<<16 | uint32(tt) {
	default:
		goto fatal

		/*
		* float to integer
		 */
	case gc.TFLOAT32<<16 | gc.TINT16,
		gc.TFLOAT32<<16 | gc.TINT32,
		gc.TFLOAT32<<16 | gc.TINT64,
		gc.TFLOAT64<<16 | gc.TINT16,
		gc.TFLOAT64<<16 | gc.TINT32,
		gc.TFLOAT64<<16 | gc.TINT64:
		if t.Op == gc.OREGISTER {
			goto hardmem
		}
		var r1 gc.Node
		gc.Nodreg(&r1, gc.Types[ft], x86.REG_F0)
		if f.Op != gc.OREGISTER {
			if ft == gc.TFLOAT32 {
				gins(x86.AFMOVF, f, &r1)
			} else {
				gins(x86.AFMOVD, f, &r1)
			}
		}

		// set round to zero mode during conversion
		var t1 gc.Node
		memname(&t1, gc.Types[gc.TUINT16])

		var t2 gc.Node
		memname(&t2, gc.Types[gc.TUINT16])
		gins(x86.AFSTCW, nil, &t1)
		gins(x86.AMOVW, ncon(0xf7f), &t2)
		gins(x86.AFLDCW, &t2, nil)
		if tt == gc.TINT16 {
			gins(x86.AFMOVWP, &r1, t)
		} else if tt == gc.TINT32 {
			gins(x86.AFMOVLP, &r1, t)
		} else {
			gins(x86.AFMOVVP, &r1, t)
		}
		gins(x86.AFLDCW, &t1, nil)
		return

		// convert via int32.
	case gc.TFLOAT32<<16 | gc.TINT8,
		gc.TFLOAT32<<16 | gc.TUINT16,
		gc.TFLOAT32<<16 | gc.TUINT8,
		gc.TFLOAT64<<16 | gc.TINT8,
		gc.TFLOAT64<<16 | gc.TUINT16,
		gc.TFLOAT64<<16 | gc.TUINT8:
		var t1 gc.Node
		gc.Tempname(&t1, gc.Types[gc.TINT32])

		gmove(f, &t1)
		switch tt {
		default:
			gc.Fatalf("gmove %v", t)

		case gc.TINT8:
			gins(x86.ACMPL, &t1, ncon(-0x80&(1<<32-1)))
			p1 := gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TINT32]), nil, -1)
			gins(x86.ACMPL, &t1, ncon(0x7f))
			p2 := gc.Gbranch(optoas(gc.OGT, gc.Types[gc.TINT32]), nil, -1)
			p3 := gc.Gbranch(obj.AJMP, nil, 0)
			gc.Patch(p1, gc.Pc)
			gc.Patch(p2, gc.Pc)
			gmove(ncon(-0x80&(1<<32-1)), &t1)
			gc.Patch(p3, gc.Pc)
			gmove(&t1, t)

		case gc.TUINT8:
			gins(x86.ATESTL, ncon(0xffffff00), &t1)
			p1 := gc.Gbranch(x86.AJEQ, nil, +1)
			gins(x86.AMOVL, ncon(0), &t1)
			gc.Patch(p1, gc.Pc)
			gmove(&t1, t)

		case gc.TUINT16:
			gins(x86.ATESTL, ncon(0xffff0000), &t1)
			p1 := gc.Gbranch(x86.AJEQ, nil, +1)
			gins(x86.AMOVL, ncon(0), &t1)
			gc.Patch(p1, gc.Pc)
			gmove(&t1, t)
		}

		return

		// convert via int64.
	case gc.TFLOAT32<<16 | gc.TUINT32,
		gc.TFLOAT64<<16 | gc.TUINT32:
//.........这里部分代码省略.........

// res = runtime.getg()
func getg(res *gc.Node) {
	var n1 gc.Node
	gc.Nodreg(&n1, res.Type, arm64.REGG)
	gmove(&n1, res)
}

func clearfat(nl *gc.Node) {
	/* clear a fat object */
	if gc.Debug['g'] != 0 {
		fmt.Printf("clearfat %v (%v, size: %d)\n", nl, nl.Type, nl.Type.Width)
	}

	w := uint64(uint64(nl.Type.Width))

	// Avoid taking the address for simple enough types.
	if gc.Componentgen(nil, nl) {
		return
	}

	c := uint64(w % 8) // bytes
	q := uint64(w / 8) // dwords

	if gc.Reginuse(mips.REGRT1) {
		gc.Fatalf("%v in use during clearfat", obj.Rconv(mips.REGRT1))
	}

	var r0 gc.Node
	gc.Nodreg(&r0, gc.Types[gc.TUINT64], mips.REGZERO)
	var dst gc.Node
	gc.Nodreg(&dst, gc.Types[gc.Tptr], mips.REGRT1)
	gc.Regrealloc(&dst)
	gc.Agen(nl, &dst)

	var boff uint64
	if q > 128 {
		p := gins(mips.ASUBV, nil, &dst)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = 8

		var end gc.Node
		gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
		p = gins(mips.AMOVV, &dst, &end)
		p.From.Type = obj.TYPE_ADDR
		p.From.Offset = int64(q * 8)

		p = gins(mips.AMOVV, &r0, &dst)
		p.To.Type = obj.TYPE_MEM
		p.To.Offset = 8
		pl := (*obj.Prog)(p)

		p = gins(mips.AADDV, nil, &dst)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = 8

		gc.Patch(ginsbranch(mips.ABNE, nil, &dst, &end, 0), pl)

		gc.Regfree(&end)

		// The loop leaves R1 on the last zeroed dword
		boff = 8
		// TODO(dfc): https://golang.org/issue/12108
		// If DUFFZERO is used inside a tail call (see genwrapper) it will
		// overwrite the link register.
	} else if false && q >= 4 {
		p := gins(mips.ASUBV, nil, &dst)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = 8
		f := (*gc.Node)(gc.Sysfunc("duffzero"))
		p = gins(obj.ADUFFZERO, nil, f)
		gc.Afunclit(&p.To, f)

		// 8 and 128 = magic constants: see ../../runtime/asm_mips64x.s
		p.To.Offset = int64(8 * (128 - q))

		// duffzero leaves R1 on the last zeroed dword
		boff = 8
	} else {
		var p *obj.Prog
		for t := uint64(0); t < q; t++ {
			p = gins(mips.AMOVV, &r0, &dst)
			p.To.Type = obj.TYPE_MEM
			p.To.Offset = int64(8 * t)
		}

		boff = 8 * q
	}

	var p *obj.Prog
	for t := uint64(0); t < c; t++ {
		p = gins(mips.AMOVB, &r0, &dst)
		p.To.Type = obj.TYPE_MEM
		p.To.Offset = int64(t + boff)
	}

	gc.Regfree(&dst)
}

/*
 * attempt to generate 64-bit
 *	res = n
 * return 1 on success, 0 if op not handled.
 */
func cgen64(n *gc.Node, res *gc.Node) {
	if res.Op != gc.OINDREG && res.Op != gc.ONAME {
		gc.Dump("n", n)
		gc.Dump("res", res)
		gc.Fatalf("cgen64 %v of %v", gc.Oconv(int(n.Op), 0), gc.Oconv(int(res.Op), 0))
	}

	switch n.Op {
	default:
		gc.Fatalf("cgen64 %v", gc.Oconv(int(n.Op), 0))

	case gc.OMINUS:
		gc.Cgen(n.Left, res)
		var hi1 gc.Node
		var lo1 gc.Node
		split64(res, &lo1, &hi1)
		gins(x86.ANEGL, nil, &lo1)
		gins(x86.AADCL, ncon(0), &hi1)
		gins(x86.ANEGL, nil, &hi1)
		splitclean()
		return

	case gc.OCOM:
		gc.Cgen(n.Left, res)
		var lo1 gc.Node
		var hi1 gc.Node
		split64(res, &lo1, &hi1)
		gins(x86.ANOTL, nil, &lo1)
		gins(x86.ANOTL, nil, &hi1)
		splitclean()
		return

		// binary operators.
	// common setup below.
	case gc.OADD,
		gc.OSUB,
		gc.OMUL,
		gc.OLROT,
		gc.OLSH,
		gc.ORSH,
		gc.OAND,
		gc.OOR,
		gc.OXOR:
		break
	}

	l := n.Left
	r := n.Right
	if !l.Addable {
		var t1 gc.Node
		gc.Tempname(&t1, l.Type)
		gc.Cgen(l, &t1)
		l = &t1
	}

	if r != nil && !r.Addable {
		var t2 gc.Node
		gc.Tempname(&t2, r.Type)
		gc.Cgen(r, &t2)
		r = &t2
	}

	var ax gc.Node
	gc.Nodreg(&ax, gc.Types[gc.TINT32], x86.REG_AX)
	var cx gc.Node
	gc.Nodreg(&cx, gc.Types[gc.TINT32], x86.REG_CX)
	var dx gc.Node
	gc.Nodreg(&dx, gc.Types[gc.TINT32], x86.REG_DX)

	// Setup for binary operation.
	var hi1 gc.Node
	var lo1 gc.Node
	split64(l, &lo1, &hi1)

	var lo2 gc.Node
	var hi2 gc.Node
	if gc.Is64(r.Type) {
		split64(r, &lo2, &hi2)
	}

	// Do op.  Leave result in DX:AX.
	switch n.Op {
	// TODO: Constants
	case gc.OADD:
		gins(x86.AMOVL, &lo1, &ax)

		gins(x86.AMOVL, &hi1, &dx)
		gins(x86.AADDL, &lo2, &ax)
		gins(x86.AADCL, &hi2, &dx)

		// TODO: Constants.
	case gc.OSUB:
		gins(x86.AMOVL, &lo1, &ax)

		gins(x86.AMOVL, &hi1, &dx)
//.........这里部分代码省略.........

func ginscmp(op gc.Op, t *gc.Type, n1, n2 *gc.Node, likely int) *obj.Prog {
	if !gc.Isfloat[t.Etype] && (op == gc.OLT || op == gc.OGE) {
		// swap nodes to fit SGT instruction
		n1, n2 = n2, n1
	}
	if gc.Isfloat[t.Etype] && (op == gc.OLT || op == gc.OLE) {
		// swap nodes to fit CMPGT, CMPGE instructions and reverse relation
		n1, n2 = n2, n1
		if op == gc.OLT {
			op = gc.OGT
		} else {
			op = gc.OGE
		}
	}

	var r1, r2, g1, g2 gc.Node
	gc.Regalloc(&r1, t, n1)
	gc.Regalloc(&g1, n1.Type, &r1)
	gc.Cgen(n1, &g1)
	gmove(&g1, &r1)

	gc.Regalloc(&r2, t, n2)
	gc.Regalloc(&g2, n1.Type, &r2)
	gc.Cgen(n2, &g2)
	gmove(&g2, &r2)

	var p *obj.Prog
	var ntmp gc.Node
	gc.Nodreg(&ntmp, gc.Types[gc.TINT], mips.REGTMP)

	switch gc.Simtype[t.Etype] {
	case gc.TINT8,
		gc.TINT16,
		gc.TINT32,
		gc.TINT64:
		if op == gc.OEQ || op == gc.ONE {
			p = ginsbranch(optoas(op, t), nil, &r1, &r2, likely)
		} else {
			gins3(mips.ASGT, &r1, &r2, &ntmp)

			p = ginsbranch(optoas(op, t), nil, &ntmp, nil, likely)
		}

	case gc.TBOOL,
		gc.TUINT8,
		gc.TUINT16,
		gc.TUINT32,
		gc.TUINT64,
		gc.TPTR32,
		gc.TPTR64:
		if op == gc.OEQ || op == gc.ONE {
			p = ginsbranch(optoas(op, t), nil, &r1, &r2, likely)
		} else {
			gins3(mips.ASGTU, &r1, &r2, &ntmp)

			p = ginsbranch(optoas(op, t), nil, &ntmp, nil, likely)
		}

	case gc.TFLOAT32:
		switch op {
		default:
			gc.Fatalf("ginscmp: no entry for op=%v type=%v", gc.Oconv(int(op), 0), t)

		case gc.OEQ,
			gc.ONE:
			gins3(mips.ACMPEQF, &r1, &r2, nil)

		case gc.OGE:
			gins3(mips.ACMPGEF, &r1, &r2, nil)

		case gc.OGT:
			gins3(mips.ACMPGTF, &r1, &r2, nil)
		}
		p = gc.Gbranch(optoas(op, t), nil, likely)

	case gc.TFLOAT64:
		switch op {
		default:
			gc.Fatalf("ginscmp: no entry for op=%v type=%v", gc.Oconv(int(op), 0), t)

		case gc.OEQ,
			gc.ONE:
			gins3(mips.ACMPEQD, &r1, &r2, nil)

		case gc.OGE:
			gins3(mips.ACMPGED, &r1, &r2, nil)

		case gc.OGT:
			gins3(mips.ACMPGTD, &r1, &r2, nil)
		}
		p = gc.Gbranch(optoas(op, t), nil, likely)
	}

	gc.Regfree(&g2)
	gc.Regfree(&r2)
	gc.Regfree(&g1)
	gc.Regfree(&r1)

	return p
}

func floatmove(f *gc.Node, t *gc.Node) {
	var r1 gc.Node

	ft := gc.Simsimtype(f.Type)
	tt := gc.Simsimtype(t.Type)
	cvt := t.Type

	// cannot have two floating point memory operands.
	if gc.Isfloat[ft] && gc.Isfloat[tt] && gc.Ismem(f) && gc.Ismem(t) {
		goto hard
	}

	// convert constant to desired type
	if f.Op == gc.OLITERAL {
		var con gc.Node
		f.Convconst(&con, t.Type)
		f = &con
		ft = gc.Simsimtype(con.Type)

		// some constants can't move directly to memory.
		if gc.Ismem(t) {
			// float constants come from memory.
			if gc.Isfloat[tt] {
				goto hard
			}
		}
	}

	// value -> value copy, only one memory operand.
	// figure out the instruction to use.
	// break out of switch for one-instruction gins.
	// goto rdst for "destination must be register".
	// goto hard for "convert to cvt type first".
	// otherwise handle and return.

	switch uint32(ft)<<16 | uint32(tt) {
	default:
		if gc.Thearch.Use387 {
			floatmove_387(f, t)
		} else {
			floatmove_sse(f, t)
		}
		return

		// float to very long integer.
	case gc.TFLOAT32<<16 | gc.TINT64,
		gc.TFLOAT64<<16 | gc.TINT64:
		if f.Op == gc.OREGISTER {
			cvt = f.Type
			goto hardmem
		}

		var r1 gc.Node
		gc.Nodreg(&r1, gc.Types[ft], x86.REG_F0)
		if ft == gc.TFLOAT32 {
			gins(x86.AFMOVF, f, &r1)
		} else {
			gins(x86.AFMOVD, f, &r1)
		}

		// set round to zero mode during conversion
		var t1 gc.Node
		memname(&t1, gc.Types[gc.TUINT16])

		var t2 gc.Node
		memname(&t2, gc.Types[gc.TUINT16])
		gins(x86.AFSTCW, nil, &t1)
		gins(x86.AMOVW, ncon(0xf7f), &t2)
		gins(x86.AFLDCW, &t2, nil)
		if tt == gc.TINT16 {
			gins(x86.AFMOVWP, &r1, t)
		} else if tt == gc.TINT32 {
			gins(x86.AFMOVLP, &r1, t)
		} else {
			gins(x86.AFMOVVP, &r1, t)
		}
		gins(x86.AFLDCW, &t1, nil)
		return

	case gc.TFLOAT32<<16 | gc.TUINT64,
		gc.TFLOAT64<<16 | gc.TUINT64:
		if !gc.Ismem(f) {
			cvt = f.Type
			goto hardmem
		}

		bignodes()
		var f0 gc.Node
		gc.Nodreg(&f0, gc.Types[ft], x86.REG_F0)
		var f1 gc.Node
		gc.Nodreg(&f1, gc.Types[ft], x86.REG_F0+1)
		var ax gc.Node
		gc.Nodreg(&ax, gc.Types[gc.TUINT16], x86.REG_AX)

		if ft == gc.TFLOAT32 {
			gins(x86.AFMOVF, f, &f0)
		} else {
			gins(x86.AFMOVD, f, &f0)
		}

//.........这里部分代码省略.........