test_exports.py 文件源码

def setUp(self):
        optparser = BaseOptions()
        optparser.parseOptions(['dummyfile.xml', '--debug=%s' % logging._levelNames[log.level].lower()])
        self.defaults = RawConfigParser()
        configfiles = self.defaults.read(TESTCONF)

        xmldata = """
<project name="testproj" code="01">
  <site name="sitea" type="primary" location="testlab">

  <host name="sitea_host01" operatingsystem="linux" />
  <host name="sitea_host02" operatingsystem="windows" />
  <host name="sitea_host03" operatingsystem="solaris" />

  <vlan type="project" number="3001">
    <network number="10.20.30.1/26" gateway="10.20.30.254"/>
  </vlan>
    <filer name="filer1" type="filer">
      <vfiler name="vftest01" rootaggr="aggr0">
        <ipaddress type="primary" ip="10.20.30.1"/>
        <aggregate name="aggr01"/>
      </vfiler>
    </filer>
  </site>
</project>
"""
        node = etree.fromstring(xmldata)
        self.project = Project()
        self.project.configure_from_node(node, self.defaults, None)

        self.sitea = self.project.get_sites()[0]
        self.filer1 = self.sitea.get_filers()[0]
        self.vfiler1 = self.filer1.get_vfilers()[0]
        self.aggr1 = self.vfiler1.get_aggregates()[0]